intersil Manuals

5962-0625601QXC, 5962-0625602QXC 1.4GHz Current Feedback Amplifiers with Enable

File format: PDF Size:111 KB

File format: PDF Size:0 KB

The 5962-0623601QPC and 5962-0623602QPC are 670MHz low noise amplifiers with ultra-low voltage noise, high speed, low power consumption voltage feedback amplifiers. Both amplifiers are stable at gains as low as 10. Not only do these devices find perfect application in high gain applications, they maintain their performance down to lower gain settings. These amplifiers are available in SBDIP packages. All parts are specified for operation over the -55°C to +125°C temperature range.

File format: PDF Size:107 KB

The 5962-0623501QPC, 5962-0623502QPC 500MHz Rail-to-Rail Amplifiers are single supply rail-to-rail amplifiers with a -3dB bandwidth of 500MHz and a slew rate of 600V/µs. They operate off a very low 11mA supply current and also feature inputs that go to 0.15V below the VS- rail. The 5962-0623501QPC includes a fast-acting disable/power-down circuit. With a 25ns disable and a 200ns enable, the 5962-0623501QPC is ideal for multiplexing applications. The 5962-0623501QPC, 5962-0623502QPC are designed for a number of general purpose video, communication, instrumentation and industrial applications. Both parts are available in 8 Ld SBDIP. All are specified for operation over the -55°C to +125°C temperature range.

File format: PDF Size:114 KB

This document introduces the features and characteristics of Intersil 82C89 CMOS Bus Arbiter

File format: PDF Size:302 KB

82c88 cmos bus controller is a high performance product manufactured using self-aligned silicon gate cmos process (scaled saji iv). the 82c88 provides the control and command timing signals for 80c86, 80c88, 8086, 8088, 8089, 80186 and 80188 based systems. the high output drive capability of the 82c88 eliminates the need for additional bus drivers. static cmos circuit design insures low operating power. the intersil advanced saji i v process results in performance equal to or greater than existing equivalent products at a significant power savings.

File format: PDF Size:246 KB

The 82C84A is a high performance CMOS Clock Generator-driver designed for CMOS and NMOS microprocessors, such as the 80C86, 80C88, 8086, and 8088. It features a crystal controlled oscillator, a divide-by-three counter, and complete 'Ready' synchronization and reset logic. The chip can operate with an external frequency source from DC to 25MHz. It offers low power consumption, TTL compatible inputs/outputs, and supports crystal controlled operation up to 25MHz.

File format: PDF Size:272 KB

This document introduces the features of 82C59A CMOS priority interrupt controller, including product compatibility, operating mode, power characteristics, etc.

File format: PDF Size:380 KB

82C55A is a high performance CMOS version of the industry standard 8255A from Intersil company. It is compatible with 80C86, 80C88 and other microprocessors, and has 24 programmable I/O pins that support 3 working modes. It is fully compatible with TTL level.

File format: PDF Size:460 KB

This document mainly introduces the characteristics of Intersil 82C54 high performance CMOS programmable timer.

File format: PDF Size:343 KB

The 82C37A is a CMOS high-performance programmable DMA controller fabricated using Intersil's advanced 2 micron CMOS process. It offers increased functionality, improved performance, and dramatically reduced power consumption. The controller improves system performance by allowing external devices to transfer data directly to or from system memory.

File format: PDF Size:379 KB

File format: PDF Size:0 KB

The HS-3282 is a high performance CMOS bus interface circuit that is intended to meet the requirements of ARINC Specification 429, and similar encoded, time multiplexed serial data protocols. This device is intended to be used with the HS-3182, a monolithic Dl bipolar differential line driver designed to meet the specifications of ARINC 429. The ARINC 429 bus interface circuit consists of two (2) receivers and a transmitter operating independently. The two receivers operate at a frequency that is ten (10) times the receiver data rate, which can be the same or different from the transmitter data rate. Although the two receivers operate at the same frequency, they are functionally independent and each receives serial data asynchronously. The transmitter section of the ARINC bus interface circuit consists mainly of a First-In First-Out (FIFO) memory and timing circuit.

File format: PDF Size:279 KB

HS-3182 is a bipolar differential line driver chip from Intersil, which is designed to meet the specifications of ARINC 429 bus. It is intended to be used with HS-3282 CMOS ARINC Bus Interface Circuit to provide data formatting and processor interface function.

File format: PDF Size:178 KB

The HD-6409/883 is a high-speed, low-power Manchester Encoder-Decoder. It can convert NRZ code to Manchester code and decode Manchester code to NRZ code. It features low bit error rate, digital PLL clock recovery, on-chip oscillator, and low operating power. It can be used for serial data communication and signal repeater applications.

File format: PDF Size:126 KB

The document describes the features and characteristics of the Intersil HD-15531, a high-performance CMOS device designed for MIL-STD-1553 and similar Manchester II encoded, time division multiplexed serial data protocols. This chip offers variable frame length, sync identification and lock-in, separate encode and decode functions, and low operating power.

File format: PDF Size:269 KB

The HD-15530 is a high performance CMOS device from Intersil that is intended to service the requirements of MIL-STD-1553 and similar Manchester II encoded, time division multiplexed serial data protocols. This LSI chip is divided into two sections, an Encoder and a Decoder. These sections operate completely independent of each other, except for the Master Reset functions. This circuit meets many of the requirements of MIL-STD- 1553. The Encoder produces the sync pulse and the parity bit as well as the encoding of the data bits. The Decoder recognizes the sync pulse and identifies it as well as decod- ing the data bits and checking parity. This integrated circuit is fully guaranteed to support the 1MHz data rate of MlL-STD-1553 over both temperature and voltage. It interfaces with CMOS, TTL or N channel support circuitry, and uses a standard 5V supply. The HD-15530 can also be used in many party line digital data communications applications, such as an environmen- tal control system driven from a single twisted pair cable of fiber optic cable throughout the building.

File format: PDF Size:274 KB

This document describes the Intersil 5962-062070xQxA series of 5.0V powered RS-232 transmitters/receivers. These transmitters/receivers comply with ElA/TIA-232 and V.28/V.24 specifications and provide ±15kV ESD protection. The targeted applications include ruggedized portable products and remotely deployed devices exposed to extreme temperature and humidity where low power consumption is critical. They feature efficient on-chip charge pumps, manual and automatic power-down functions (except for the 5962-0620707Q2A), and a standby supply current of only 1µA. Small footprint packaging and the use of small, low value capacitors ensure board space savings. Data rates greater than 250kbps are guaranteed at worst case load conditions. This family is fully compatible with 5.0V-only systems.

File format: PDF Size:183 KB

This document describes the Intersil 5962-062070xQxA series of 3.3V RS-232 transmitters/receivers, which meet ElA/TIA-232 and V.28/V.24 specifications even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection and are suitable for ruggedized portable products and remotely deployed devices exposed to extreme temperature and humidity, with low power consumption.

File format: PDF Size:183 KB

The HI-546, HI-547, HI-548, and HI-549 are analog multiplexers with active overvoltage protection and guaranteed rON matching. These devices allow analog input levels to greatly exceed the power supply voltage without damaging the device or disturbing the signal path of other channels. Active protection circuitry ensures that signal fidelity is maintained even under fault conditions that would destroy other multiplexers. Analog inputs can withstand constant 70VP-P levels even with ±15V supplies. Digital inputs can also sustain continuous faults up to 4V greater than either supply. In addition, signal sources are protected from short circuiting in the event of multiplexer supply loss, with each input presenting 1kΩ of resistance under this condition. These features make the HI-546, HI-547, HI-548, and HI-549 ideal for use in systems where the analog inputs originate from external equipment or separately powered circuitry. All devices are fabricated with 44V Dielectrically Isolated CMOS technology. The HI-546 is a single 16-Channel, the HI-547 is an 8-Channel differential, the HI-548 is a single 8-Channel, and the HI-549 is a 4-Channel differential device. If input overvoltage protection is not needed, the HI-506/507/508/509 multiplexers are recommended. For further information, see Application Notes AN520 and AN521. For MIL-STD-883 compliant parts, request the HI-546/883.

File format: PDF Size:459 KB