intersil Manuals

The ISL22346WMVEP integrates four digitally controlled potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit.

File format: PDF Size:101 KB

The ISL22326WMVEP is a dual digitally controlled potentiometer with features like low noise, low power, I2C bus, and 128 taps. It integrates two digitally controlled potentiometers and non-volatile memory, making it suitable for various applications including control, parameter adjustments, and signal processing.

File format: PDF Size:102 KB

The ISL22316WMUEP is a digitally controlled potentiometer from Intersil with low noise, low power and I2C bus interface. It can be used in a wide variety of applications including control, parameter adjustments and signal processing.

File format: PDF Size:104 KB

HM-6642/883 512 x 8 CMOS PROM is a 512 x 8 CMOS NiCr fusible link Programmable Read Only Memory produced by Intersil, which has synchronous circuit design techniques and CMOS processing techniques, and has high speed performance and very low power consumption.

File format: PDF Size:331 KB

The HM-6617/883 2K x 8 CMOS PROM is a low power synchronous design, using Intersil's advanced self-aligned silicon gate CMOS process technology, offering ultra-low standby current.

File format: PDF Size:152 KB

This document describes a CMOS 8192 x 8-bit Static Random Access Memory with features such as low standby supply current, fast address access time, and low data retention supply voltage. It is suitable for microprocessor-based systems and is easy to interface with Intersil 80C86 and 80C88 microprocessors.

File format: PDF Size:248 KB

The document introduces the HM-6551/883, which is a 256 x 4 static CMOS RAM fabricated using self-aligned silicon gate technology. It features high performance and low power operation, and provides on chip latches for address and data outputs, allowing efficient interfacing with microprocessor systems.

File format: PDF Size:536 KB

The HM-65162/883 is a CMOS 2048 x 8 Static Random Access Memory manufactured using the Intersil Advanced SAJI V process. The device utilizes asynchronous circuit design for fast cycle time and ease of use.

File format: PDF Size:195 KB

The HM-6514/883 is a 1024 x 4 static CMOS RAM fabricated using self-aligned silicon gate technology by HMC. The device utilizes synchronous circuitry to achieve high performance and low power operation.

File format: PDF Size:178 KB

The HI-574A, HI-674A are complete 12-bit Analog-to-Digital Converters with a digital interface for microprocessor control, a +10V reference clock, three-state outputs, and successive approximation conversion performed by two monolithic dice. The analog die features the Intersil Dielectric Isolation process for enhanced AC performance and freedom from latch-up. Custom design of each IC (bipolar analog and CMOS digital) has resulted in improved performance compared to previous versions. The voltage comparator has high PSRR and a high-speed current-mode latch, providing precise decisions down to 0.1 LSB of input overdrive. Noise reduction of more than 2X has been achieved by using current instead of voltage for signal transmission between the analog and digital ICs. The clock oscillator is current controlled for excellent temperature stability. The HI-X74(A) offers standard unipolar and bipolar input ranges, with laser trimming for specified linearity, gain, and offset accuracy. The low noise buried zener reference circuit is trimmed for minimum temperature coefficient.

File format: PDF Size:423 KB

HI-565A is a fast, 12-bit, current output, digital-to-analog converter produced by Intersil. The monolithic chip includes a precision voltage reference, thin-film R2R ladder, reference control amplifier and twelve high speed bipolar current switches. The Intersil dielectric isolation process provides latch free operation while minimizing stray capacitance and leakage currents, to produce an excellent combination of speed and accuracy. Also, ground currents are minimized to produce a low and constant current through the ground terminal, which reduces error due to code dependent ground currents. HI-565A dice are laser trimmed for a maximum integral nonlinearity error of ±0.5 LSB at 25oC. In addition, the low noise buried zener reference is trimmed both for absolute value and temperature coefficient. Power dissipation is typically 250mW, with ±15V supplies. The HI-565A is offered in both commercial and military grades. See Ordering Information.

File format: PDF Size:250 KB

This document describes the features and characteristics of the HI-303 dual SPDT CMOS analog switch, including break-before-make switching, low and nearly constant ON resistance over the full analog signal range, and low power dissipation. The switch is TTL compatible and has a logic “0” condition with an input less than 0.8V and a logic “1” condition with an input greater than 4V.

File format: PDF Size:303 KB

This document describes the features and characteristics of the HD-6402/883 CMOS Universal Asynchronous Receiver Transmitter (UART), including operating frequency, low power design, programmable word length, stop bits and parity, automatic data formatting and status generation, etc. The HD-6402/883 is designed for interfacing computers or microprocessors to an asynchronous serial data channel and can be used in various applications such as modems, printers, peripherals, and remote data acquisition systems.

File format: PDF Size:142 KB

The HD-4702/883 is a programmable bit rate generator that provides 13 commonly used bit rates, using a 2.4576MHz crystal/input to produce standard frequency output (16 times bit rate), low operating current, and conforms to EIA RS-404 standards.

File format: PDF Size:182 KB

This datasheet introduces the features and characteristics of DG201A and DG202 quad SPST, CMOS analog switches, including input signal range, low rDS(ON), TTL, CMOS compatibility, pull-up resistor, latch-up protection, second source, maximum supply ratings, logic inputs accept negative voltages, and packages.

File format: PDF Size:73 KB

80C88 CMOS 8-/16-Bit Microprocessor is a high performance 8-/16-bit CMOS CPU manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It has two operating modes, MINimum for small systems and MAXimum for larger applications such as multiprocessing, allowing user configuration to achieve the highest performance level. It is fully compatible with existing NMOS 8088 hardware and Intersil CMOS peripherals. It is fully software compatible with the 80C86, 8086, and 8088 microprocessors, allowing use of existing software in new designs.

File format: PDF Size:541 KB

The 141 TM 80C86 CMOS 16-bit microprocessor is compatible with NMOS 8086 and features a completely static CMOS design, low power operation, and a wide operating temperature range.

File format: PDF Size:737 KB

80C286/883 is an Intersil high-performance microprocessor with built-in memory protection that supports operating system and task isolation as well as program and data privacy within tasks.

File format: PDF Size:502 KB

5962-0721301QXC, 5962-0721302QXC, 5962-0721303QYC 500MHz rail-to-rail amplifiers

File format: PDF Size:127 KB

The 5962-0721201QXC is a video distribution amplifier designed by Intersil. It features a high drive capability of 450mA and a wide operating voltage range of 5V to 12V. It also has a low power consumption of only 13mA.

File format: PDF Size:222 KB