intersil Manuals

intersil HI-5042 HI-5043 HI-5047 HI-5049 HI-5051 Manual

The HI-5042, HI-5043, HI-5047, HI-5049, HI-5051 CMOS Analog Switches are a family of CMOS analog switches that offer low resistance switching performance for analog voltages up to the supply rails and for signal currents up to 80mA.

File format: PDF Size:429 KB

intersil HI-201HS Manual

The HI-201HS is a high-speed analog switch from Intersil. It is manufactured using CMOS technology and has four independently selectable switch channels. It is pin-compatible with the industry standard HI-201 switch. It has a maximum switching time of 50ns, a low ON resistance of 50 ohms, and a wide analog signal range of ±15V. It is suitable for applications that require improved switching performance, especially switching speed, such as high-speed multiplexing, high-frequency analog switching, and sample-and-hold circuits.

File format: PDF Size:660 KB

intersil HI-200 HI-201 Manual

HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds (HI-200 240ns, and HI-201 185ns) combined with low power dissipation (15mW at 25oC). Each switch provides low “ON” resistance operation for input signal voltage up to the supply rails and for signal current up to 80mA. Rugged DI construction eliminates latch-up and substrate SCR failure modes. All devices provide break-before-make switching and are TTL and CMOS compatible for maximum application versatility. HI-200/HI-201 are ideal components for use in high frequency analog switching. Typical applications include signal path switching, sample and hold circuit, digital filters, and operational amplifier gain switching networks.

File format: PDF Size:307 KB

intersil HI-200/883 Manual

The HI-200/883 is a monolithic device comprising two independently selectable SPST switchers which feature fast switching speeds (240ns typical) combined with low power dissipation (15mW typical @ +25°C). Each switch provides low “ON” resistance operation for input signal voltages up to the supply rails and for signal currents up to 25mA continuous. Rugged DI construction eliminates latch-up and substrate SCR failure modes. All devices provide break-before-make switching and are TTL and CMOS compatible for maximum application versatility. HI-200/883 is an ideal component for use in high frequency analog switching. Typical applications include signal path switching, sample and hold circuits, digital filters, and op amp gain switching networks.

File format: PDF Size:278 KB

intersil DG411/883 Manual

The DG411/883 series monolithic CMOS analog switches are drop-in replacements for the popular DG211 and DG212 series devices. They include four independent single pole throw (SPST) analog switches, and TTL and CMOS compatible digital inputs. These switches feature lower analog ON-resistance (<35Ω) and faster switch time (tON <175ns) compared to the DG211 or DG212. Charge injection has been reduced, simplifying sample and hold applications. The improvements in the DG411/883 series are made possible by using a high voltage silicon-gate process. An epitaxial layer prevents the latch-up associated with older CMOS technologies. The 44V maximum voltage range permits controlling 40VP-P signals. Power supplies may be single-ended from +5V to +34V, or split from ±5V to ±20V. The four switches are bilateral, equally matched for AC or bidirectional signals. The ON-resistance variation with analog signals is quite low over a ±15V analog input range. This permits independent control of turn-on and turn-off times for SPDT configurations, permitting “break-before-make” or “make-before-break” operations.

File format: PDF Size:215 KB

intersil HA-4900 HA-4902 HA-4905 Manual

HA-4900, HA-4902, HA-4905 Precision Quad Comparators offer fast response time, low offset voltage, low offset current and virtually no channel-to-channel crosstalk for applications requiring accurate, high speed, signal level detection

File format: PDF Size:205 KB

intersil HA-5127/883 Manual

The HA-5127/883 is an ultra-low noise, precision operational amplifier that combines precision DC and wideband high-speed characteristics. It utilizes Intersil D.I. technology and advanced processing techniques to achieve low noise precision instrumentation performance with high speed and wideband capability. The amplifier features low VOS, wide gain-bandwidth, high open loop gain, and high CMRR. It operates over a wide supply range and consumes only 120mW of power. The HA-5127/883 is ideal for low-level transducer signal amplifier circuits and can also be used in instrumentation amplifiers, pulse or RF amplifiers, audio preamplifiers, and signal conditioning circuits.

File format: PDF Size:192 KB

intersil HA-5101/883 Manual

The HA-5101/883 is a low noise, high performance operational amplifier. It features an excellent noise voltage density of 4.5nV/√Hz (max) at 1kHz. The unity gain stable HA-5101/883 yields a 10MHz unity gain bandwidth and a 6V/µs slew rate. The HA-5101/883's DC characteristics assure accurate performance. The 3mV (max) offset voltage is externally adjustable and offset voltage drift is just 3µV/°C. Low bias currents (200nA max) reduce input current errors and the high open loop voltage gain of 100kV/V, over temperature, increases the loop gain for low distortion amplification. The HA-5101/883 is ideal for audio applications, especially low-level signal amplifiers such as microphone, tape head and preamplifiers. Additionally, it is well suited for low distortion oscillators, low noise function generators and high Q filters.

File format: PDF Size:1129 KB

intersil HA-5002/883 Manual

HA-5002/883 is a monolithic, wideband, high slew rate, high output current buffer amplifier. It offers 1300V/µs slew rate typically and 110MHz of bandwidth, with ±100mA minimum output current capability and a 3Ω output impedance. It is designed to replace LH0002 with improved reliability and circuit performance.

File format: PDF Size:207 KB

intersil HA-4741 Manual

HA-4741 is a quad operational amplifier produced by Broadcom Semiconductor. Its open-loop gain is as high as 3.5MHz, which can be used in applications such as audio amplifiers that require amplification of wideband signals

File format: PDF Size:341 KB

intersil HA-2400 HA-2404 HA-2405 Manual

THA-2400/04/05 is a series of four-channel programmable amplifiers providing a level of versatility unsurpassed by any other monolithic operational amplifier.

File format: PDF Size:66 KB

intersil HFA1130 Manual

File format: PDF Size:364 KB

intersil HA-5190 HA-5195 Manual

HA-5190/5195 are operational amplifiers featuring a combination of speed, precision, and bandwidth. They are capable of delivering 200V/µs slew rate with a settling time of 70ns, making them ideal for output amplifiers for accurate, high-speed D/A converters or the main components in high-speed sample/hold circuits. They are also suitable for pulse and wideband video amplifiers.

File format: PDF Size:268 KB

intersil HA-5104/883 Manual

The HA-5104/883 is a low noise, high performance quad operational amplifier that offers an array of dynamic specifications including 1V/µs slew rate (min), and 8MHz bandwidth (typ). It also features very low noise specifications of 4.3nV/√Hz at 1kHz (typ) or 6nV/√Hz (max).

File format: PDF Size:102 KB

intersil HA-5102 HA-5104 Manual

HA-5102/04 series operational amplifiers features low noise, high performance, 8MHz bandwidth, 3V/µs slew rate, 0.5mV offset voltage and 30nA offset current, suitable for audio amplifiers and active filters etc

File format: PDF Size:500 KB

intersil HA-5020 Manual

File format: PDF Size:0 KB

intersil HA-2544 Manual

This document is about Intersil HA-2544 50MHz, Video Operational Amplifier. It offers high voltage gain (6kV/V) and high phase margin (65 degrees), while maintaining tight gain flatness over the video bandwidth.

File format: PDF Size:773 KB

intersil HA-2539 Manual

HA-2539 is a high gain bandwidth product from Intersil, with a very high slew rate and wide bandwidth. The product's gain bandwidth product reaches 600MHz, with a slew rate of 600V/µs, making it ideal for video and RF amplifier designs with a closed loop gain of 10 or greater. The product also has a ±10V swing, excellent AC parameters, and high open loop gain, making it very useful in high speed data acquisition systems.

File format: PDF Size:493 KB

intersil HA-2520/883 Manual

HA-2520/883 is a high-performance operational amplifier from Intersil that offers unsurpassed specifications for slew rate, bandwidth and settling time. It is designed for closed loop gains of 3 or greater without external compensation and provides low offset current and high input impedance. The 100V/µs (min) slew rate and fast settling time make it ideal for pulse amplification and data acquisition designs.

File format: PDF Size:91 KB

intersil HA-2510/883 Manual

The HA-2510/883 is a high performance operational amplifier which sets the standards for maximum slew rate and wide bandwidth operation in moderately powered, internally compensated, monolithic devices. In addition to excellent dynamic characteristics, this dielectrically isolated amplifier also offers low offset current and high input impedance. The ±50V/µs minimum slew rate and fast settling time of the HA-2510/883 are ideally suited for high speed D/A, A/D, and pulse amplification designs. The HA-2510/883’s superior bandwidth and 750kHz minimum full power bandwidth are extremely useful in RF and video applications. To insure compliance with slew rate and transient response specifications, all devices are 100% tested for AC performance characteristics over full temperature limits. To improve signal conditioning accuracy, the HA-2510/883 provides a maximum offset current of 25nA and a minimum input impedance of 50MΩ, both at 25oC, as well as offset voltage adjust capability.

File format: PDF Size:202 KB

Brands



Products