ST Manuals

The NE556 is a dual monolithic timing circuit that is highly stable and capable of producing accurate time delays or oscillation. It has features such as low turn off time, maximum operating frequency greater than 500kHz, timing from microseconds to hours, operates in both astable and monostable modes, high output current can source or sink 200mA, adjustable duty cycle, and TTL compatibility.

File format: PDF Size:649 KB

The NE555 monolithic timing circuit is a highly stable controller capable of producing accurate time delays or oscillation. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For a stable operation as an oscillator, the free running frequency and the duty cycle are both accurately controlled with two external resistors and one capacitor. The circuit may be triggered and reset on falling waveforms, and the output structure can source or sink up to 200mA.

File format: PDF Size:472 KB

The NE555 is a highly stable controller capable of producing accurate time delays or oscillation. It has low turn-off time, maximum operating frequency greater than 500kHz, timing from microseconds to hours, operates in both astable and monostable modes, high output current can source or sink 200mA, adjustable duty cycle, TTL compatible, and temperature stability of 0.005% per °C.

File format: PDF Size:472 KB

The LM158-LM258-LM358 low power dual operational amplifiers have large DC voltage gain (100dB), wide bandwidth (unity gain: 1.1 mHz), very low supply current (essentially independent of supply voltage), low input bias current (20nA), low input offset voltage (2mV), low input offset current (2nA), input common-mode voltage range includes ground, differential input voltage range equals the power supply voltage, large output voltage swing (0V to (VCC - 1.5V)) and other features.

File format: PDF Size:298 KB

This product is a low power dual voltage comparator with very low supply current, independent low voltage comparators, designed to operate from a single supply over a wide range of voltages.

File format: PDF Size:251 KB

LM193/LM193A/LM293/LM293A/LM393/LM393A are low-power dual-voltage comparators with wide power-supply voltage ranges, including single and dual supplies, from +2V to +36V or ±1V to ±18V.

File format: PDF Size:251 KB

This datasheet introduces the characteristics of LM193, LM193A, LM293, LM293A, LM393, LM393A low power dual voltage comparators, including wide single-supply voltage range or dual supplies: +2V to +36V or ±1V to ±18V, very low supply current (0.4mA) independent of supply voltage (1mW/comparator at +5V), low input bias current: 25nA typical. Low input offset current: ±5nA typical. Low input offset voltage: ±1mV typical. Input common-mode voltage range includes ground. Low output saturation voltage: 250mV typical (Io = 4mA). Differential input voltage range equal to the supply voltage. TTL, DTL, ECL, MOS, CMOS compatible outputs

File format: PDF Size:251 KB

This product is an operational amplifier with high gain, low power consumption, low noise, high output amplitude and other characteristics. It is suitable for signal amplification, differential amplification, voltage follower and other scenes.

File format: PDF Size:224 KB

This document describes an operational amplifier with internal frequency compensation, large DC voltage gain, wide bandwidth, very low supply current/op, low input bias current, low input offset voltage, and low input offset current. It is suitable for transducer amplifiers, DC gain blocks, and all conventional op-amp circuits, which can be more easily implemented in single power supply systems.

File format: PDF Size:224 KB

This is a low power dual operational amplifier with features including internal frequency compensation, a DC voltage gain of more than 100 dB, a 1.1 mHz bandwidth (unity gain), and an extremely low supply current per operator that is essentially independent of the supply voltage. In addition, this amplifier also features low input bias current (20nA), low input offset voltage (2mV), low input offset current (2nA), input common-mode voltage range including ground, differential input voltage range equal to the power supply voltage, and a large output voltage swing of 0V to (VCC-1.5V).

File format: PDF Size:763 KB

This document describes the features of the LM124-LM224-LM324 series of low power quad operational amplifiers. These features include wide gain bandwidth, input common-mode voltage range including ground, large voltage gain, very low supply current per amplifier, low input bias current, and low input offset voltage, etc.

File format: PDF Size:804 KB

This reference manual provides complete information on how to use the STM32F10xxx microcontroller memory and peripherals. It introduces the features, memory sizes, packages, and peripherals of the STM32F10xxx microcontroller family.

File format: PDF Size:8590 KB

M54/74HC696/697 are high speed CMOS up/down counters fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. The HC696/698 are BCD DECADE COUNTER, and the HC697/699 are 4-BIT BINARY COUNTER. Both devices have register. They count on the positive edge of the counterclock input (CCK) when selected by the ”Counter Mode”. If the input U/D is held ”H”, the internal counter counts up, and held ”L”, counts down. The internal counter’s outputs are stored in the output register at the positive edge of register clock (RCK). The counter

File format: PDF Size:425 KB

This document provides preliminary information about a new product under development. The product is an 8-bit MCU with features such as nested interrupts, flash memory, 10-bit ADC, brushless motor control, five timers, SPI, and LINSCI. It also includes details about memory options, clock and supply management, interrupt management, I/O ports, and timers.

File format: PDF Size:3447 KB

The ST-9160 is a fully featured HD AVC decoder IC

File format: PDF Size:229 KB

This document introduces the features and characteristics of STA2500D Bluetooth™ V2.1 + EDR ("Lisbon"), including the Ericsson technology licensing baseband core (EBC), the Bluetooth ™ specification compliance, the HW support for packet types, the AFH and CQDDR, the "Lisbon" features, the transmit power, the HCI, and the pitch-period error concealment (PPEC).

File format: PDF Size:585 KB

The STFPC320 is a complete front panel controller/driver with standby power management and real-time clock. All functions are programmable using the I2C bus. Low power consumption is achieved during standby operation. The STFPC320 provides the standby power management to the host.

File format: PDF Size:930 KB

File format: PDF Size:0 KB

STM32F105xx STM32F107xx Connectivity line, ARM-based 32-bit MCU with 64/256 KB Flash, USB OTG, Ethernet, 10 timers, 2 CANs, 2 ADCs, 14 communication interfaces.

File format: PDF Size:1000 KB

74V2G02 is an advanced high-speed CMOS DUAL 2-INPUT NOR GATE fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. The internal circuit is composed of 3 stages including buffer output, which provide high noise immunity and stable output.

File format: PDF Size:79 KB