TEXAS Manuals

This document introduces the UCC35705 and UCC35706 devices, which are 8-pin voltage mode primary side controllers with fast over-current protection. They are used as core high-speed building blocks in high performance isolated and non-isolated power converters. UCC35705/UCC35706 devices feature a high speed oscillator with integrated feed-forward compensation for improved converter performance. A typical current sense to output delay time of 25ns provides fast response to overload conditions. The IC also provides an accurate programmable maximum duty cycle clamp for increased protection which can also be disabled for the oscillator to run at maximum possible duty cycle. Two UVLO options are offered. The UCC35705 with lower turn-on voltage is intended for dc-to-dc converters while the higher turn-on voltage and the wider UVLO range of the UCC35706 is better suited for offline applications. The UCC35705/UCC35706 family is offered in 8-pin MSOP (DGK), SOIC (D) and PDIP (P) packages.

File format: PDF Size:345 KB

This document is about the introduction of UCC3806, including product features, characteristics, application range, etc.

File format: PDF Size:695 KB

The TI 2000 Series Antennas offer 6 form factors, are proven in harsh industrial environments, and provide Best in Class Performance through patented HDX technology for applications including access control, vehicle identification, container tracking, asset management, and waste management

File format: PDF Size:282 KB

The Tag-it HF-I Transponder Inlay is a product that complies with the ISO/IEC 15693 standard. It has a user memory of 2k bits and can be used in a variety of applications, including product authentication, ticketing, library management, supply chain management, etc. The product is thin and flexible, and can be easily converted into paper or plastic labels.

File format: PDF Size:191 KB

File format: PDF Size:191 KB

RI-I01-110A RI-I11-110A is a paper RFID tag with operating frequency of 13.56 MHz, passive resonance frequency of 14.36 MHz ± 200 kHz, activation field strength read of 103 dBµA/m, activation field strength write of 108 dBµA/m, built-in 32-bit read-only number, and programmable 256-bit memory. The typical programming cycle is 100,000 times, and the data retention time is 10 years.

File format: PDF Size:36 KB

The Texas Instruments RI-R6C-001A is a 13.56MHz RFID reader that supports Tag-it HF, ISO 15693-2, ISO 14443-2 and Transparent communication protocols. It features a 3.3V-5V DC operating voltage, a maximum current consumption of 200mA, and a working temperature range of -40°C to +85°C.

File format: PDF Size:167 KB

This document describes the Texas Instruments low-frequency (LF) reader module, which is used for communication with Texas Instruments 134.2 kHz LF transponders in various applications. The module features best-in-class performance and reduced power output for handheld and medium read/write range applications. It has been proven in harsh industrial environments and is easy to install and use.

File format: PDF Size:400 KB

This document describes the reference manual and application circuit description of the 1996 Application Specific Products Texas Instruments Registration and Identification System RI-RFM-006A TIRIS RF-Module IC for Automotive. The product is an integrated circuit (IC) module for automotive applications.

File format: PDF Size:142 KB

The data sheet describes the features and characteristics of TI's RI-TRP-RR2B, RI-TRP-WR2B, RI-TRP-DR2B, and RI-TRP-IR2B products.

File format: PDF Size:169 KB

The TPS2048 and TPS2058 are quad power distribution switches from Texas Instruments. Their features include 135mΩ high side MOSFET switch, 250mA continuous current per channel, independent short circuit and thermal protection with overcurrent logic output, operating range of 2.7-V to 5.5-V, logic level enable input, typical rise time of 2.5ms, undervoltage lockout, maximum standby supply current of 20µA, bidirectional switch, available in 16-pin SOIC package, ambient temperature range of -40°C to 85°C, and 2-kV human-body-model, 200-V machine-model ESD protection.

File format: PDF Size:426 KB

The TPS2041A through TPS2044A and TPS2051A through TPS2054A power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices incorporate 80-mΩ N-channel MOSFET high-side power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by an independent logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V. When the output load exceeds the current-limit threshold or a short is present, these devices limit the output current to a safe level.

File format: PDF Size:488 KB

File format: PDF Size:0 KB

The TPS2046 and TPS2056 dual power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely. These devices incorporate in single packages two 135-mΩ N-channel MOSFET high-side power switches for power-distribution systems that require multiple power switches. Each switch is controlled by a logic enable compatible with 5-V and 3-V logic. Gate drive is provided by an internal charge pump that controls the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V. When the output load exceeds the maximum current limit, the internal short-circuit protection circuit will turn off the output and generate a logic high output, indicating an overcurrent condition. Thermal shutdown protection prevents permanent output switch damage due to excessive temperature. Undervoltage lockout function shuts off the output when the supply voltage drops below 2.7 V.

File format: PDF Size:412 KB

The TPS2047 and TPS2057 triple power-distribution switches are designed for applications where heavy capacitive loads and short circuits are likely. These devices incorporate in single packages three 135-mΩ N-channel MOSFET high-side power switches for power-distribution systems that require multiple power switches. Each switch is controlled by a logic enable compatible with 5-V and 3-V logic. Gate drive is provided by an internal charge pump that controls the power-switch rise times and fall times to minimize current surges during switching. The charge pump, requiring no external components, allows operation from supplies as low as 2.7 V. When the output load exceeds the current limit, an overcurrent logic output is activated.

File format: PDF Size:427 KB

The TPS2047 and TPS2057 triple power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely. These devices incorporate in single packages three 135 mΩ N-channel MOSFET high-side power switches for power-distribution systems that require multiple power switches. Each switch is controlled by a logic enable compatible with 5-V and 3-V logic. Gate drive is provided by an internal charge pump that controls the power-switch rise times and fall times to minimize current surges during switching. The charge pump, requiring no external components, allows operation from supplies as low as 2.7 V. When the output load exceeds the current limit, the charge pump enables internal overcurrent protection circuitry which turns the power supply off and generates a logic output signal. Short-circuit protection circuitry turns the switch off rapidly under short-circuit conditions.

File format: PDF Size:427 KB

The TPS2043 and TPS2053 are triple power distribution switches with a maximum resistance of 135 mΩ, 5 V input, and a continuous current of 500 mA per channel. It has short circuit protection and overcurrent logic output, operating voltage range of 2.7 V to 5.5 V, logic level enable input, 2.5 ms typical rise time, undervoltage lockout, 20 µA maximum standby supply current, bidirectional switch, available in 16-pin SOIC package, ambient temperature range of -40°C to 85°C, 2 kV Human-Body-Model, 200-V Machine-Model ESD protection, UL listed-File No. E169910.

File format: PDF Size:437 KB

File format: PDF Size:0 KB

tps2045 and tps2055 are switches for applications where heavy capacitive loads and short circuits are likely

File format: PDF Size:408 KB

This document summarizes the TPS2041B/TPS2051B series products, introduces the product features and characteristics, including package, pins, working current, application scenarios, etc.

File format: PDF Size:1014 KB