TEXAS Manuals

TPIC1021A is a LIN transceiver produced by TI company. It supports the LIN 2.0 physical layer specification and supports a communication speed of 20kbps. It has a sleep mode, in which the current consumption is extremely low. It supports LIN slave applications and supports LIN slave wake-up. It has EMI and ESD protection and supports ISO9141 (K-Line)-Like functions.

File format: PDF Size:279 KB

SLTS204C is a 5V input, 15A output power module produced by TI, which has the characteristics of high output current, small size and high performance. It can power complex multi-processor digital systems.

File format: PDF Size:298 KB

The document describes the features and characteristics of the PTH05000 series of non-isolated power modules, including up to 6A output current, 5V input voltage, wide-output voltage adjust from 0.9V to 3.6V, efficiencies up to 94%, and 160W/in³ power density.

File format: PDF Size:409 KB

The PTH03000W is a 3.3V input 6A output power module from TI that has a wide output voltage range of 0.9V to 2.5V, an efficiency of up to 95%, and a power density of 115W/in³. It also supports on/off inhibit and under-voltage lockout.

File format: PDF Size:270 KB

The PTH03010W is a non-isolated wide output voltage adjust power module. The input voltage range is 3.3V, the output current can reach 15A, and the output voltage can be adjusted in the range of 0.8V to 2.5V. The module has high efficiency, high power density, output overcurrent protection, input voltage suppression, pre-bias startup, automatic tracking, output voltage sensing and other features.

File format: PDF Size:509 KB

The TI PTHxx010Y series are a series of ready-to-use switching regulator modules specifically designed for bus termination in DDR and QDR memory applications. They operate from either a 3.3 V, 5 V or 12 V input voltage and provide 62 W/in3 power density. These modules feature up to 91% efficiency, 15 A output current (12 A for 12 V input), output overcurrent protection (output tracks the system VREF) (nonlatching, auto-reset), DDR and QDR compatibility, VTT standby on/off inhibit, POLA™ compatibility, undervoltage lockout and operating temperature range of –40°C to 85°C.

File format: PDF Size:786 KB

This document introduces a series of switching regulator modules designed by Texas Instruments for bus termination in DDR and QDR memory applications. These modules feature high efficiency, VTT bus termination output, output overcurrent protection, and 15A output current.

File format: PDF Size:786 KB

The PTH03020W is a 3.3V input 22A, 3.3V input non-isolated wide-output voltage adjustable power module from TI, which has high performance, small size and industry-leading features.

File format: PDF Size:524 KB

The PTB78520W is a 20-A rated, wide-input (18-60 V) isolated DC/DC converter that incorporates Auto-Track™ power-up sequencing. This allows these modules to simultaneously power up with any other downstream non-isolated, Auto- Track compliant module. The PTB78520W module provides two outputs, each regulated to the same voltage. During power up, the voltage at ‘VO Bus’ rises first, allowing this output to provide input power to any downstream non-isolated module. The voltage from ‘VO Seq’ is then allowed to rise simulta- neously, under the control of Auto-Track, along with the outputs from the down- stream modules.

File format: PDF Size:438 KB

This product is a 5V input non-isolated wide-output adjust power module from Texas Instruments. It has a 6A output current, an output voltage adjustable range of 0.8V to 3.6V, an efficiency of up to 95%, a power density of 135W/in³, on/off inhibit and pre-bias startup functions, and an operating temperature range of -40 to +85 °C. It also has auto-track, output over-current protection, and other functions.

File format: PDF Size:287 KB

The document introduces the features and characteristics of the 6-A non-isolated DDR/QDR memory bus termination modules product, including VTT bus termination output, 6 A output current, 3.3-V, 5-V or 12-V input voltage, DDR & QDR compatibility, on/off inhibit (for VTT standby), under-voltage lockout, operating temperature, efficiency, power density, output over-current protection, safety agency approvals, etc.

File format: PDF Size:259 KB

The PTH04000W is a highly integrated, low-cost switching regulator module that delivers up to 3 A of output current. Occupying a small PCB area, the PTH04000W provides output current at a high efficiency and with minimal power dissipation, thereby eliminating the need for a heat sink. Their small size (0.75 inch × 0.5 inch), high efficiency, and low cost makes these modules practical for a variety of applications. The input voltage range of the PTH04000W is from 3 V to 5.5 V, allowing operation from either a 3.3 V or 5.5 V input voltage.

File format: PDF Size:1299 KB

The TPIC1021 is the LIN (Local Interconnect Network) physical interface, which integrates the serial transceiver with wake up and protection features. The LIN bus is a single wire, bi-directional bus typically used for low-speed in-vehicle applications.

File format: PDF Size:218 KB

The TRS3318 is a single-chip RS-232 transceiver from TI that supports a data rate of 460kbps and has integrated ESD protection. The operating supply voltage range is 2.25V-3V.

File format: PDF Size:317 KB

The PT5100 modules are a series of economical, easy-to-use 1-A positive step-down, Integrated Switching Regulators (ISRs). These ISRs are compatible with most TO-220 style linear regulators, and when employed as a linear replacement, provide significant benefits in both efficiency and power dissipation. They are recommended for use in a wide variety of on-board power regulation applications. These include computer, data storage, industrial controls, and battery powered equipment. Modules are laser-trimmed for optimal output voltage accuracy, and exhibit excellent line and load regulation. The PT5100 also features output current limiting and thermal shutdown protection.

File format: PDF Size:163 KB

The PT5071 is a 1.5-ampere rated step-up/step-down Integrated Switching Regulator (ISR) that provides a tightly regulated 12V output voltage from a 7V to 16V variable input source. This high-performance ISR has applications in systems where the input voltage straddles the desired 12V output. The regulator has an adjustable output voltage and input start-up threshold, and a standby function for power conservation.

File format: PDF Size:132 KB

The PT5071 is a 1.5 ampere rated step-up/step-down Integrated Switching Regulator (ISR) that provides a tightly regulated 12V output voltage from a 7V to 16V variable input source. This high-performance ISR has applications in systems where the input voltage straddles the desired 12V output. The regulator has an adjustable output voltage and input start-up threshold, and a standby function for power conservation.

File format: PDF Size:132 KB

The PT5810 Excalibur™ series of integrated switching regulators (ISRs) combines outstand- ing power density with a comprehensive list of features. They are an ideal choice for applications where board space is a premium and performance cannot be compromised.

File format: PDF Size:215 KB

UCC27223 is a high-speed synchronous buck driver for today’s high-efficiency, lower-output voltage designs. Using Predictive Gate Drive® (PGD) control technology, these drivers reduce diode conduction and reverse recovery losses in the synchronous rectifier MOSFET(s). The UCC27223 includes an enable pin that controls the operation of both outputs. A logic latch is also included to keep both outputs low until the first PWM input pulse comes in. The RDS(on) of the SR pull-down sourcing device is also minimized for higher frequency operations. This closed loop feedback loop also improves driver stability and efficiency.

File format: PDF Size:523 KB

This document is the UCC2541 datasheet, which introduces the main features and characteristics of the product, including high-efficiency synchronous buck operation, dual ±3-A TrueDrive outputs, an on-board programmable oscillator, TR input, parallel average current mode control loop, 3 modes to support 2.7-V to 35-V input bias, output stage reverse current protection, user programmable shutdown, ±1.0% initial tolerance bandgap reference, high bandwidth error amplifiers, thermally enhanced HTSSOP 20-pin PowerPAD package and QFN-32 pin, synchronization input, and support for pre-bias applications

File format: PDF Size:685 KB