ST Manuals

This document describes a four-channel high-gain operational amplifier with wide gain bandwidth, large voltage gain, low supply current, low input bias current, low input offset voltage, and wide power supply range.

File format: PDF Size:780 KB

LM124-LM224-LM324 is a low power quad operational amplifier with wide gain bandwidth, input common-mode voltage range that includes ground, large voltage gain, very low supply current/amplifier, low input bias current, and input offset voltage. They can operate from both single power supply and dual power supply, and the supply current is independent of the magnitude of the power supply voltage.

File format: PDF Size:921 KB

LM124-LM224-LM324 is a low power quad operational amplifier from STMicroelectronics. It features a wide gain bandwidth of 1.3MHz, a large voltage gain of 100dB, a low supply current of 375μA, a low input bias current of 20nA, a maximum input offset voltage of 5mV and a maximum input offset current of 2nA.

File format: PDF Size:804 KB

LM124-LM224-LM324 are low power quad operational amplifiers. Their features are: bandwidth of 1.3 MHz, input common-mode voltage range includes ground, voltage gain of 100 dB, supply current per amplifier very low at 375 µA, input bias current of 20 nA, input offset voltage of 5 mV max. (For more accurate applications, use the equivalent parts LM124A-LM224A-LM324A which feature 3 mV max.), wide power supply range: single supply: +3 V to +30 V; dual supplies: ±1.5 V to ±15 V.

File format: PDF Size:804 KB

The TLPxxM/G/G-1 series are tripolar transient surge arrestors used for primary and secondary protectionin sensitivetelecom equipment.

File format: PDF Size:192 KB

The TLPxxM/G/G-1 series are bipolar transient surge arrestors used for primary and secondary protection in sensitive telecom equipment. The features include tripolar crowbar protection, voltage range selected for telecom applications, high repetitive peak pulse current, low holding current, low capacitance, and low leakage current.

File format: PDF Size:192 KB

TLPxxM/G/G-1 is a tripolar transient surge arrestor manufactured by ST Microelectronics. It is used for primary and secondary protection of sensitive telecom equipment. Its features include repetitive peak pulse current of 100A (10 / 1000µs), holding current of 150mA, low capacitance of 110pF, and low leakage current of 5µA. It has aging and noise resistant features. If destroyed, it will fall into short circuit, still ensuring protection. It is available in PowerSO-10TM and D2PAK packages for surface mount applications.

File format: PDF Size:192 KB

TDA2170 is a high efficiency power booster for direct driving of vertical windings of TV yokes. It is intended for use in Colour are B & W television receivers as well as in monitors and displays.

File format: PDF Size:192 KB

TDA2052 is a 60W Hi-Fi audio power amplifier with features such as mute/stand-by function, high output power, low distortion, etc. It is suitable for applications in the TV and Hi-Fi fields.

File format: PDF Size:169 KB

The TDA2052 is a monolithic integrated circuit in Heptawatt package, intended for use as audio class AB amplifier in TV or Hi-Fi field application. Thanks to the wide voltage range and to the high out current capability it’s able to supply the high- est power into both 4Ω and 8Ω loads even in presence of poor supply regulation. The built in Muting/Stand-by function simplifies the remote operations avoiding also switching on- off noises.

File format: PDF Size:169 KB

TDA2051 is a monolithic integrated circuit for audio class AB amplifier. It has features of high output power, high operating voltage, low distortion, and short circuit protection, making it suitable for Hi-Fi applications.

File format: PDF Size:43 KB

TDA2051 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. It is able to provide up to 40W typ. into 4 ohm load @ THD = 10%, VS = ±18V, f = 1KHz and up to 33W into 8ohm load @ THD = 10%, VS = ±22V, f = 1KHz. Moreover, the TDA2051 delivers typically 60W music power into 4 ohm load over 1 sec at VS= 22.5V, f = 1KHz. The very low harmonic and crossover distortion performances make the device the most suitable for Hi-Fi field application.

File format: PDF Size:43 KB

The TDA2050 is an audio class AB audio amplifier produced by Texas Instruments. The chip uses Pentawatt packaging, has high output power (50W music power IEC 268.3 rules), high operating voltage (50V), single or split power supply operations, very low distortion, short circuit protection (output to GND) and thermal shutdown function.

File format: PDF Size:190 KB

TDA2050 is a high-power audio amplifier sold by Dinghao Electronics. It has a rated output power of 50W, a wide operating voltage range, supports single or dual power supply, low distortion, and has short circuit protection and thermal shutdown functions.

File format: PDF Size:190 KB

TDA2030 is a low frequency class AB amplifier provided by Dinghao Electronics, with a supply voltage of ±18V, an output power of 14W, high output current and very low harmonic and crossover distortion.

File format: PDF Size:540 KB

This document describes the features and characteristics of the BTA/BTB04 T/D/S/A triac family, including very low IGT and IH, suitable for general purpose applications where gate high sensitivity is required, and suitable for 4Q applications such as phase control and static switching.

File format: PDF Size:246 KB

BTA/BTB04 T/D/S/A is a high performance glass passivated PNPN device with low IGT and IH thresholds, suitable for general purpose applications where high gate sensitivity is required, such as four-quadrant control and static switching.

File format: PDF Size:246 KB

This document mainly introduces the characteristics of BTA40/41 series products, including main characteristics, package form, order codes, absolute maximum ratings, electrical characteristics, etc.

File format: PDF Size:97 KB

The BTA41 A/B and BTB41 B are a group of high-performance glass-passivated PNPN devices. They are suitable for general-purpose applications where high surge current capability is required. They are used for phase control and static switching on inductive or resistive loads.

File format: PDF Size:97 KB

The document describes the features and characteristics of the L7800AB/AC series of three-terminal positive regulators, including output current exceeding 1A, multiple output voltages, thermal overload protection, and output transition SOA protection.

File format: PDF Size:351 KB