NXP Manuals

The BB182 is a planar technology variable capacitance diode with high linearity and excellent matching performance. It is packaged in an ultra small plastic SMD package with low series resistance. It is mainly used for electronic tuning in VHF television tuners and voltage controlled oscillators (VCO).

File format: PDF Size:45 KB

This document is an important notice informing customers that Philips Semiconductors has been renamed NXP Semiconductors, and provides new contact details. The document also describes the features and applications of the BB202 product.

File format: PDF Size:229 KB

The BZV55 series is a low-power voltage regulator diode in a small hermetically sealed glass SOD80C Surface-Mounted Device (SMD) package. The diodes are available in the normalized E24 ±2 % (BZV55-B) and approximately ±5 % (BZV55-C) tolerance range. The series consists of 37 types with nominal working voltages from 2.4 V to 75 V.

File format: PDF Size:70 KB

Philips Semiconductors Product specification, BU508AF is a high voltage, high-speed switching npn transistor in a fully isolated SOT199 envelope, primarily for use in horizontal deflection circuits of colour television receivers.

File format: PDF Size:49 KB

This document is the user manual for the LPC17xx series microcontrollers released by NXP on August 19, 2010. The manual provides detailed information on the features and characteristics of products such as LPC1769, LPC1768, LPC1767, LPC1766, LPC1765, LPC1764, LPC1763, LPC1759, LPC1758, LPC1756, LPC1754, and LPC1752. These products are based on the ARM Cortex-M3 32-bit processor and support functions such as USB, Ethernet, CAN, and I2S.

File format: PDF Size:5059 KB

LPC23xx series ARM microcontrollers are for applications requiring serial communications for a variety of purposes.

File format: PDF Size:4023 KB

This document describes the functionalities of PN532 and the changes between PN532C104 and PN532C106.

File format: PDF Size:700 KB

The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced NXP Slave Host Controller and the NXP ISP1181B Peripheral Controller.

File format: PDF Size:703 KB

This document is a detailed description of the Philips Semiconductors PIP3104-P Logic level TOPFET product, including its functions, features, and parameters.

File format: PDF Size:33 KB

TOPFET PIP3115-B is a logic level MOSFET device from Philips Semiconductors, with a rated voltage of 50 V and a rated current of 8 A. The package type is SOT404.

File format: PDF Size:31 KB

TDA8552T and TDA8552TS are audio power amplifier chips produced by Philips Semiconductors. They support digital volume control and headphone sensing functions, and can be used in portable consumer products, notebook computers and communication equipment.

File format: PDF Size:191 KB

The TDA18271HD is a Silicon Tuner IC designed mainly for terrestrial analog and digital TV reception. It is compatible with all analog and digital TV standards and delivers a low IF signal to a demodulator (for analog TV) and/or channel decoder (for digital TV).

File format: PDF Size:291 KB

TDA18218HN is a Silicon Tuner IC designed for digital terrestrial (DVB-T) TV reception. TDA18218HN integrates the overall tuning function, including selectivity and provides a low-IF output signal. TDA18218HN uses integrated IF filters to support 6 MHz, 7 MHz or 8 MHz channel bandwidths. TDA18218HN requires only one single 16 MHz crystal for clock generation. A clock signal is available on crystal oscillator output pins (XTO_P / XTO_N) to synchronize the channel decoder. TDA18218HN is a low cost Silicon Tuner targeting digital terrestrial applications. TDA18218HN matches the performance of the conventional can tuners. Additionally, the following benefits can be stated: • Easy on-board integration • Drastically reduces: – the size of the tuner function – the power consumption 2. Features I Fully integrated IF selectivity; eliminating the need for external SAW filters I Fully integrated oscillators with no external components I Integrated wideband gain control I Alignment free I RF loop-through for easy implementation in the Set-Top Box (STB) I Integrated die thermal sensor I Single 3.3 V power supply I Low power consumption (750 mW) I Crystal oscillator output buffer (16 MHz) for single crystal applications I I2C-bus interface compatible with 3.3 V and 5 V microcontrollers I Three Standby modes I RoHS packaging 3. Applications I DVB-T Set-Top Box (STB) and TV receiver I System application optimization is done

File format: PDF Size:116 KB

BTA416Y series B and C is 16A three-quadrant triacs, with very high commutation performance, high immunity to dV/dt, isolated mounting base, 2500V RMS isolation voltage and high operating junction temperature. This product is suitable for heating and cooking appliances, non-linear rectifier-fed motor loads, high power motor control (such as vacuum cleaners), electronic thermostats for heating and cooling loads and solid-state relays.

File format: PDF Size:86 KB

This document describes a new generation of high commutation triacs with internal insulation in a TO-220 plastic package. The features include high commutation performance, high immunity to dV/dt, isolated mounting base, 2500V RMS isolation voltage, and high operating junction temperature. It is suitable for heating and cooking appliances, non-linear rectifier-fed motor loads, high power motor control (such as vacuum cleaners), electronic thermostats for heating and cooling loads, solid-state relays, etc.

File format: PDF Size:86 KB

NXP's GPIO expanders are a simple, cost-effective way to monitor and control several peripheral signals. They make it easy for designers to add extra I/O to their design and thereby free up the microprocessor's GPIO for other, more important functions. NXP is the industry leader in serial-interface GPIO expanders, and offers a broad selection of cost-effective, easy-to-use options. NXP's I2C-bus GPIO expanders support three operating modes for data transfer: Standard Mode, with data transfer rates from 0 kbps to 100 kbps, Fast Mode (Fm), with data transfer rates from 0 kbps to 400 kbps, and Fast-mode Plus (Fm+) with data rates from 0 kbps to 1 Mbps. Since the newer Fm+ GPIO are backward compatible all the way back to Standard Mode, it's easy to expand existing designs without changing the bus master device.

File format: PDF Size:3637 KB

This application guide introduces the wide portfolio of advanced solutions that NXP offers for set-top-boxes (STBs). All these solutions are built on our deep understanding of what network operators and manufacturers need.

File format: PDF Size:3415 KB

File format: PDF Size:0 KB

This document is a specification for the package outline of NXP Semiconductors. It provides information about the dimensions, pin configuration, and characteristics of the package.

File format: PDF Size:13 KB

This document is a password request form for confidential documents of NXP Semiconductors' I•CODE RFID family. The requested passwords are for the following documents: SL026711.pdf, SL070010.pdf, DT050430.pdf, DT041031.pdf, DT067933.pdf, DT075131.pdf, DT082230.pdf, and MC073933.pdf. The requester agrees to keep the passwords and documents confidential and handle them responsibly.

File format: PDF Size:91 KB