National Manuals

COP888EK 8-Bit CMOS ROM Based Microcontrollers with 8k Memory, Comparator, and Single-slope A/D Capability

File format: PDF Size:565 KB

COP888xG/CS Family 8-Bit CMOS ROM Based Microcontrollers with 4k to 24k Memory, Comparators and USART

File format: PDF Size:535 KB

File format: PDF Size:0 KB

COP884BC/COP885BC 8-Bit CMOS ROM Based Microcontrollers with 2k Memory, Comparators, and CAN Interface

File format: PDF Size:702 KB

The COP680C, COP681C, COP682C, COP880C, COP881C, COP882C, COP980C, COP981C, and COP982C are members of the COPSTM microcontroller family. They are fully static parts fabricated using double-metal silicon gate microCMOS technology. This low-cost microcontroller is a complete microcomputer containing all system timing, interrupt logic, ROM, RAM, and I/O necessary to implement dedicated control functions in a variety of applications. Features include an 8-bit memory mapped architecture, MICROWIRE PLUSTM serial I/O, a 16-bit timer/counter with capture register, and a multi-sourced interrupt. Each I/O pin has software selectable options to adapt the device to the specific application. The part operates over a voltage range of 2.5 to 6.0V, and high throughput is achieved with an efficient, regular instruction set operating at a 1 microsecond per instruction rate.

File format: PDF Size:395 KB

COP472-3 is a liquid crystal display controller produced by National Semiconductor company, which supports 36 segment displays and can drive 3x12 4-digit digital displays or 3x24 8-digit digital displays

File format: PDF Size:145 KB

File format: PDF Size:586 KB

COP404C ROMless CMOS Microcontrollers is a product of National Semiconductor Corporation. It is an accurate emulation of the COP444C, COP424C and COP410C. The product has the lowest power consumption, static, power-saving IDLE state and HALT mode, 4 ms instruction time, 128c4 RAM, 2k c 8 ROM address, true vector interrupt, three-level subroutine stack and single-thread function.

File format: PDF Size:338 KB

File format: PDF Size:688 KB

COP424C, COP425C, COP426C, COP324C, COP325C, COP326C and COP444C, COP445C, COP344C, COP345C Single-Chip 1k and 2k CMOS Microcontrollers

File format: PDF Size:341 KB

COP413C, COP413CH, COP313C, and COP313CH are fully static, single-chip CMOS microcontrollers that belong to the COPS family. They are fabricated using double-poly, silicon-gate CMOS technology and provide complete microcomputer functionality, including system timing, internal logic, ROM, RAM, and I/O. Features include single supply operation, instruction set designed for keyboard input, display output, and BCD data manipulation. These products offer a low-cost solution for various human interface control environments.

File format: PDF Size:216 KB

The ADC122S101 is a low-power, two-channel CMOS 12-bit analog-to-digital converter with a high-speed serial interface. It is fully specified over a sample rate range of 500 kSPS to 1 MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept one or two input signals at inputs IN1 and IN2. The output serial data is straight binary, and is compatible with several standards, such as SPI™, QSPI™, MICROW- IRE, and many common DSP serial interfaces. The ADC122S101 operates with a single supply that can range from +2.7V to +5.25V. Normal power consumption using a +3V or +5V supply is 4.3 mW and 13.1 mW, respec- tively. The power-down feature reduces the power consump- tion to just 0.14 µW using a +3V supply, or 0.32 µW using a +5V supply. The ADC122S101 is packaged in an 8-lead MSOP package. Operation over the industrial temperature range of −40˚C to +85˚C is guaranteed.

File format: PDF Size:928 KB

ADC0820 is a 8-bit high precision A/D converter with track/hold function produced by Microchip Technology. It uses a half-flash conversion technique and offers a 1.5µs conversion time and dissipates only 75mW of power. The ADC0820 has a built-in track-and-hold function and does not require an external sample-and-hold circuit. It can be used as a memory location or I/O port for easy interface with a microprocessor.

File format: PDF Size:485 KB

The ADC08200 is a low-power, 8-bit, monolithic analog-to-digital converter with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates up to 230 MSPS while consuming just 1.05 mW per MHz of clock frequency, or 210 mW at 200 MSPS. Raising the PD pin puts the ADC08200 into a Power Down mode where it consumes 1 mW. The unique architecture achieves 7.3 Effective Bits with 50 MHz input frequency. The ADC08200 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08200’s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The ADC08200 is offered in a 24-lead plastic package (TSSOP) and is specified over the industrial temperature range of −40˚C to +85˚C.

File format: PDF Size:529 KB

1MSPS, 12-/10-/8-Bit A/D Converters in SOT-23 & LLP

File format: PDF Size:898 KB

The ADC081S021 is a low-power, single channel CMOS 8-bit analog-to-digital converter with a high-speed serial interface. It is fully specified over a sample rate range of 50 ksps to 200 ksps. The converter is based upon a successive- approximation register architecture with an internal track- and-hold circuit. The output serial data is straight binary, and is compatible with several standards, such as SPI™, QSPI™, MICROWIRE, and many common DSP serial interfaces. The ADC081S021 operates with a single supply that can range from +2.7V to +5.25V. Normal power consumption using a +3.6V or +5.25V supply is 1.3 mW and 7.7 mW, respectively.

File format: PDF Size:725 KB

The ADC081S051 is a low-power, single channel CMOS 8-bit analog-to-digital converter with a high-speed serial interface. It is fully specified over a sample rate range of 200 kSPS to 500 kSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. The output serial data is straight binary, and is compatible with several standards, such as SPI™, QSPI™, MICROWIRE, and many common DSP serial interfaces. The ADC081S051 operates with a single supply that can range from +2.7V to +5.25V. Normal power consumption using a +3V or +5V supply is 2.9 mW and 10.5 mW, respectively. The power-down feature reduces the power consumption to as low as 2.6 µW using a +5V supply. The ADC081S051 is packaged in an 6-lead LLP package. Operation over the industrial temperature range of −40˚C to +85˚C is guaranteed.

File format: PDF Size:603 KB

ADC0819 8-Bit Serial I/O A/D Converter with 19-Channel Multiplexer

File format: PDF Size:285 KB

ADC08161 is a 500ns A/D converter with internal sample-and-hold (S/H) and 2.5V bandgap reference, which dissipates only 100mW of power.

File format: PDF Size:255 KB

ADC0816/ADC0817 is a 8-Bit µP Compatible A/D Converters with 16-Channel Multiplexer

File format: PDF Size:253 KB