SGS-THOMSON Manuals

STV8225 is a sound demodulator chip produced by STMicroelectronics of Italy

File format: PDF Size:85 KB

M54HC157/158 M74HC157/158 are high speed CMOS QUAD 2-CHANNEL MULTI- PLEXER’s fabricated with silicon gate C2MOS tech- nology. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. These devices consist of four 2-input digital multi- plexers with common select and strobe inputs. The HC158 is an inverting multiplexer while the HC157 is a non-inverting multiplexer. When the STROBE input is held High, selection of data is inhibited and all the outputs become Low in the M74HC157 and High in the M74HC158. The SELECT decoding determines whether the A or B inputs get routed to their corresponding Y outputs. All inputs are equipped with protection circuits against static dis- charge and transient.

File format: PDF Size:242 KB

TS68HC901 HCMOS multi-function peripheral, which has 8 input/output pins, 16 source interrupt controllers, four timers with individually programmable prescaling, a single channel USART.

File format: PDF Size:334 KB

File format: PDF Size:740 KB

The M54/74HC690/691/692/693 are high-speed CMOS counters/registers fabricated in silicon gate C2MOS technology. They offer the high-speed performance of LSTTL combined with the low power consumption of CMOS. The internal circuit consists of three stages, including a buffer output, which provides high noise immunity and stable output. These devices integrate a synchronous counter, a four-bit D-type register, and quadruple two-line to one-line multiplexers with three-state outputs in a single 20-pin package. The counter can be programmed using the data inputs and features enable P and enable T inputs for easy expansion. The device can function as either a counter or a parallel register output.

File format: PDF Size:409 KB

The document describes the features and characteristics of the M28C16 16K (2K x 8) parallel EEPROM, including fast access time, low power consumption, fast write cycle, and data protection.

File format: PDF Size:117 KB

File format: PDF Size:700 KB

VNW50N04A is a monolithic device made using SGS-THOMSON Vertical Intelligent Power M0 Technology, intended for replacement of standard power MOSFETS in DC to 50 KHz applications. Built-in thermal shut-down, linear current limitation and overvoltage clamp protect the chip in harsh enviroments. Fault feedback can be detected by monitoring the voltage at the input pin.

File format: PDF Size:119 KB

Search UCN4801A suppliers

File format: PDF Size:158 KB

M54HC4351/52/53 is a high-speed bipolar CMOS logic gate circuit produced by National Semiconductor. It consists of 8 three-terminal bidirectional switches. Its characteristic is that 5V logic signal can be used to control ±5V analog signal, fast switching speed, low switch resistance, high output voltage ratio, wide input voltage range, strong anti-interference ability and low power consumption

File format: PDF Size:288 KB

The M494 is a monolithic LSI integrated circuit fabricated in SGS-THOMSON's EPM2 process; an N-channel, Planox, double poly MOS process capable of including a floating gate NV memory cell (EEPROM). The i.c. has been designed as a complete digital TV tuning system based on the voltage synthesis principle and as a replacement for all the conventional tuners.

File format: PDF Size:205 KB

The GS-DC200 series is a family of single Eurocard boards that contain all the logic necessary to operate a stepper motor, including the instructions decoding, the step timing generation, the storage of the program to be executed. The motor interface can deliver phase current up to 2.5A. The boards can be used as a stand alone complete motion control system or they can be driven by a central host computer. The GS-DC200 family isbuilt around the GS-C200, GS-C200S, GS-D200, GS-D200S modules, (see the relevant data sheet) and it retains all the features of these modules.

File format: PDF Size:86 KB

File format: PDF Size:0 KB

File format: PDF Size:279 KB

File format: PDF Size:297 KB

UAA4713 is a monolithic integrated circuit intended to control triac or relay switch for AC-mains timer applications. The device can be used in a wide range of industrial and consumer applications such as light control, automatic door opening detector, fire alarm, fluid level control, etc. The circuit processes the output signal of an infrared pyroelectric detector which senses temperature changes caused by heat radiation of the human body. If the sensor detects a temperature change, a programmable timer will start and switch a lamp or other loads to the mains. A further input for a photo-resistive sensor allows to program circuit operation depending on the daylight intensity. Internal circuits avoid false triggering of the external actuators.

File format: PDF Size:310 KB

File format: PDF Size:7101 KB

File format: PDF Size:1085 KB

HCC/HCF40192B is a presettable BCD up/down counter (dual clock), 40192B is BCD type, 40193B is binary type. The counters can be used alone or cascaded in multiple stages. The counters have high speed asynchronous reset and preset capabilities, and the output terminals use standard symmetrical output characteristics.

File format: PDF Size:301 KB

This document is provided by ICminer.com Electronic-Library Service with a copyright of 2003. The document describes the features and characteristics of the products.

File format: PDF Size:384 KB