ST Manuals (Industrial)

STP7NC80Z - STP7NC80ZFP STB7NC80Z - STB7NC80Z-1 N-CHANNEL 800V - 1.3Ω - 6.5A TO-220/FP/D2PAK/I2PAK Zener-Protected PowerMESH™III MOSFET is a 800V ultra-low Rds(on) gate diode protected power MOSFET, mainly used for single-ended SMPS, monitors, computers and industrial applications.

File format: PDF Size:549 KB

stp7nc80z is a n-channel 800v - 1.3Ω - 6.5a to-220/fp/d2pak/i2pak zener-protected powermesh™iii mosfet from dinghao brand, with very low gate input resistance and minimized gate charge.

File format: PDF Size:1046 KB

This document introduces the STP7NC70Z and STB7NC70Z series of N-channel 700V power MOSFETs, which have a typical on-resistance of 1.1Ω, extremely high dv/dt and capacitance capability, and integrated back-to-back Zener diodes. They are mainly used in single-ended SMPS, monitors, computers, industrial equipment, and welding equipment.

File format: PDF Size:483 KB

The document introduces the features and characteristics of the STP7NC70Z and STB7NC70Z series products, including N-CHANNEL 700V power MOSFETs, extremely high dv/dt and capability, and PowerMESH™III technology with Zener protection.

File format: PDF Size:483 KB

STP7NC40 is an N-channel MOSFET from ST, with a rated voltage of 400V and a rated current of 6A. The typical on-resistance is 0.75 ohms and it is packaged in a TO-220 package.

File format: PDF Size:583 KB

The STP7NC40 is a N-channel 400V-0.75Ω-6A TO-220 PowerMESH™II MOSFET. It features a typical RDS(on)=0.75Ω, exceptional dv/dt capability, 100% avalanche tested and low gate charge.

File format: PDF Size:583 KB

STP75NF75L/-1 is an N-channel MOSFET from STMicroelectronics. It has a rated drain-source voltage of 75 V, a typical on-resistance of 0.009 ohms, and a maximum continuous current of 75 A. This MOSFET is suitable for applications such as solenoid and relay drivers, DC motor control, DC-DC converters, and automotive electronics.

File format: PDF Size:821 KB

The STP75NF75L is a N-CHANNEL 75V - 0.009 Ω - 75A D2PAK/I2PAK/TO-220 STripFET™ II POWER MOSFET from STMicroelectronics. It features a TYPICAL RDS(on) = 0.009Ω, EXCEPTIONAL dv/dt CAPABILITY, 100% AVALANCHE TESTED and LOW THRESHOLD DRIVE. It is especially suitable for use as primary switch in advanced high- efficiency, high-frequency isolated DC-DC converters for Telecom and Computer applications.

File format: PDF Size:821 KB

File format: PDF Size:123 KB

STP7NB30 is a high-performance N-channel MOSFET designed by STMicroelectronics with a typical RDS(on) of 0.75 ohms, exceptional avalanche and dv/dt capabilities, 100% avalanche tested, very low intrinsic capacitances and minimized gate charge. Applications include high current, high speed switching, switch mode power supplies (SMPS), welding equipment and uninterrupted power supplies and motor drives.

File format: PDF Size:123 KB

STMicroelectronics announces the STB7N52K3 to STP7N52K3 series N-channel 525 V, 0.84Ω, 6.3 A SuperMESH3™ Power MOSFETs. These devices integrate ST's established PowerMESH™ layout with a further fine tuning and new optimization of the vertical structure, combining a significant on-resistance reduction over previous generation with special attention to ensure a very good dv/dt capability and higher margin in breakdown voltage for the most demanding application.

File format: PDF Size:368 KB

The STP75NS04Z is an N-channel, clamped, TO-220 power MOSFET from ST. It features a RDS(on) of 7mΩ and an ID of 80A.

File format: PDF Size:219 KB

The BTA16, BTB16 and T16 series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applica- tions such as static relays, heating regulation, in- duction motor starting circuits. or for phase control operation in light dimmers, motor speed controllers, . The snubberless versions (BTA/BTB.W and T16 series) are specially recommended for use on in- ductive loads, thanks to their high commutation performances. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rat- ed at 2500VRMS) complying with UL standards (File ref.: E81734).

File format: PDF Size:108 KB

BTA16, BTB16 and T16 series triacs are suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, in-duction motor starting circuits. or for phase control operation in light dimmers, motor speed controllers, .

File format: PDF Size:108 KB

TIP120/121/122 and TIP125/126/127 are silicon epitaxial-base NPN power transistors with monolithic Darlington configuration, mounted in Jedec TO-220 plastic package. They are intended for use in power linear and switching applications. The complementary PNP types are TIP125, TIP126 and TIP127, respectively.

File format: PDF Size:63 KB

TIP122FP and TIP127FP are STMicroelectronics preferred sales type silicon power Darlington transistors in a monolithic Darlington configuration mounted in a Jedec TO-220FP fully molded isolated package.

File format: PDF Size:284 KB

TIP122FP TIP127FP is a silicon Epitaxial-Base NPN power transistor in monolithic Darlington configuration mounted in Jedec TO-220FP fully molded isolated package. It is intented for use in power linear and switching applications.

File format: PDF Size:658 KB

File format: PDF Size:0 KB

The LM117/LM217/LM317 are ST's 1.2V to 37V adjustable voltage regulators with an output current of over 1.5A and a wide input voltage range. They have a 0.1% line and load regulation, are suitable for high voltage floating operation and have a full range of protection functions, including current limiting, thermal shutdown and SOA control.

File format: PDF Size:994 KB

The L78xx series of three-terminal positive regulators is available in TO-220, TO-220FP, TO-3 and D2PAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1 A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.

File format: PDF Size:1714 KB