ST Manuals (Industrial)

STE2007 is a low power single chip LCD controller/driver from ST Microelectronics. It can drive 96 columns and up to 68 lines and is designed for monochrome displays. The STE2007 includes a fully integrated bias voltage generator (up to 5x multiplication factor) and an internal oscillator, reducing the number of external components required and the current consumption to a minimum. The STE2007 features the three standard serial interfaces (3- and 4-line serial, I2C interface).

File format: PDF Size:656 KB

The STE2004S is a low power CMOS LCD controller driver. Designed to drive a 65 rows by 102 columns graphic display, it provides all necessary functions in a single chip, including on-chip LCD supply and bias voltages generators, resulting in a minimum of externals components and in a very low power consumption.

File format: PDF Size:1131 KB

The STE2004 is a low power CMOS LCD controller driver. Designed to drive a 65 rows x 102 columns graphic display, it provides all necessary functions in a single chip, including on-chip LCD supply and bias voltages generators, resulting in a minimum of externals components and in a very low power consumption. STE2004 features six standard interfaces (3-lines Serial, 3-lines SPI, 4-lines SPI, 68000 and I2C).

File format: PDF Size:743 KB

STE2002 is a low power CMOS LCD controller driver. Designed to drive a 81 rows by 128 columns graphic display, provides all necessary functions in a single chip, including on-chip LCD supply and bias voltages generators, resulting in a minimum of exter- nals components and in a very low power consump- tion.

File format: PDF Size:494 KB

The document describes a low power CMOS LCD controller driver called STE2001. It is designed to drive a 65 rows by 128 columns graphic display and provides all necessary functions in a single chip, including on-chip LCD supply and bias voltage generators, resulting in a minimum of external components and low power consumption.

File format: PDF Size:324 KB

File format: PDF Size:324 KB

STE180NE10 is an N-channel 100V - 4.5 mΩ - 180A ISOTOP STripFET POWER MOSFET product of STMicroelectronics, with a typical RDS(on) of 4.5 mΩ, 100% avalanche testing, low intrinsic capacitance, minimized gate charge and reduced voltage spread.

File format: PDF Size:87 KB

STE180N10 is a N-channel power MOSFET from ISOTOP company. Its features are RDS(on) typical value is 5.5mΩ, 100% avalanche tested, low parasitic capacitance, minimized gate charge and reduced voltage spread.

File format: PDF Size:86 KB

STE15NA100 N is an N-channel enhancement mode fast power MOS transistor with low RDS(on), high current, large SOA, easy to mount, etc. It is suitable for applications such as SMPS and UPS, motor control, welding equipment, PWM output stage, ultrasonic circuits, etc.

File format: PDF Size:61 KB

File format: PDF Size:0 KB

STE110NS20FD is a N-channel 200V - 0.022Ω - 110A ISOTOP MESH OVERLAY™ Power MOSFET device produced by STMicroelectronics. The device has the following features: typical RDS(on) = 0.022Ω, extremely high dv/dt capability, 100% avalanche tested, minimized gate charge, ±20V gate to source voltage rating, low intrinsic capacitance and fast body-drain diode: low trr, Qrr. The device is suitable for high current, high speed switching, switch mode power supply (SMPS), welding equipment DC-AC converter and uninterrupted power supply and motor drive applications.

File format: PDF Size:239 KB

STE110NA20 is an N-channel enhancement mode fast power MOS transistor with features such as low on-resistance, high current power module, large SOA, easy mounting, low thermal resistance, and low internal parasitic inductance. It is suitable for applications such as SMPS, UPS, motor control, welding equipment, output stage for PWM, ultrasonic circuits, etc.

File format: PDF Size:99 KB

The STE100P, also referred to as STEPHY1, is a high performance Fast Ethernet physical layer interface for 10BASE-T and 100BASE-TX applications. It was designed with advanced CMOS technology to provide a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MAC) and a physical media interface for 100BASE-TX of IEEE802.3u and 10BASE-T of IEEE802.3. The STEPHY1 supports both half-duplex and full-duplex operation, at 10 and 100 Mbps operation. Its operating mode can be set using auto-negotiation, parallel detection or manual control. It also allows for the support of auto-negotiation functions for speed and duplex detection.

File format: PDF Size:198 KB

This document is about STE10/100A datasheet

File format: PDF Size:399 KB

The STE10/100 is a high performance PCI Fast Ethernet controller with integrated physical layer interface for 10BASE-T and 100BASE-TX applications. It was designed with advanced CMOS technology to provide a glueless 32-bit bus master interface for the PCI bus, boot ROM interface, CSMA/CD protocol for Fast Ethernet, as well as the physical media interface for 100BASE-TX of IEEE802.3u and 10BASE-T of IEEE802.3. The auto-negotiation function is also supported for speed and duplex detection. The STE10/100 provides both half-duplex and full-duplex operation, as well as support for full-duplex flow control. It provides long FIFO buffers for transmission and receiving, and early interrupt mechanism to enhance performance. The STE10/100 also supports ACPI and PCI compliant power management function.

File format: PDF Size:406 KB

This document introduces STE10/100, a high performance PCI Fast Ethernet controller with integrated physical layer interface for 10BASE-T and 100BASE-TX application.

File format: PDF Size:406 KB

This product is a PCI Fast Ethernet controller that supports 10BASE-T and 100BASE-TX applications.

File format: PDF Size:406 KB

BTA16 B BTB16 B triacs are high performance glass passivated PNPN devices. These parts are suitables for general purpose ap- plications where high surge current capability is re- quired. Application such as phase control and static switching on inductive or resistive load.

File format: PDF Size:63 KB

BTA16 BW/CW BTB16 BW/CW is a high performance triac family from Schneider Electric. The product has high switching speed, high surge current, high rated voltage and other characteristics. It is widely used in phase control and static switching applications.

File format: PDF Size:65 KB

BTA16 B BTB16 B are high performance glass passivated PNPN devices, suitable for general purpose applications where high surge current capability is required. For example, phase control and static switching on inductive or resistive load.

File format: PDF Size:63 KB