National Manuals (Industrial)
National DS90C2501 handbook
The DS90C2501 is a highly integrated scaling IC with LVDS transmitter with a scaled resolution up to SXGA+ for single pixel input.
File format: PDF Size:627 KB
National DS90C032B handbook
The DS90C032B is a quad CMOS differential line receiver designed for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 155.5 Mbps (77.7 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology.
File format: PDF Size:163 KB
National DS90C032 handbook
The DS90C032 is a low power, high speed, quad channel LVDS receiver from Texas Instruments.
File format: PDF Size:218 KB
National DS90C031B handbook
The DS90C031B is a quad CMOS differential line driver designed for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 155.5 Mbps (77.7 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology. The DS90C031B accepts TTL/CMOS input levels and translates them to low voltage (350 mV) differential output signals. In addition the driver supports a TRI-STATE® function that may be used to disable the output stage, disabling the load current, and thus dropping the device to an ultra low idle power state of 11 mW typical. In addition, the DS90C031B provides power-off high impedance LVDS outputs. This feature assures minimal loading effect on the LVDS bus lines when VCC is not present. The DS90C031B and companion line receiver (DS90C032B) provide a new alternative to high power pseudo-ECL devices for high speed point-to-point interface applications.
File format: PDF Size:257 KB
National DS90C031 handbook
The DS90C031 is a quad CMOS differential line driver designed by National Semiconductor Corporation for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 155.5 Mbps (77.7 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology. The DS90C031 accepts TTL/CMOS input levels and translates them to low voltage (350 mV) differential output signals. In addition, the driver supports a TRI-STATE® function that may be used to disable the output stage, disabling the load current, and thus dropping the device to an ultra low idle power state of 11 mW typical.
File format: PDF Size:273 KB
National COP87L88RW handbook
File format: PDF Size:0 KB
National COP87L88RG handbook
The COP87L88RG is a member of the COP8TM OTP microcontroller family with 32 Kbytes of program memory. It is pin and software compatible to the mask ROM COP888GG product family.
File format: PDF Size:446 KB
National COP87L88KG handbook(1)
COP87L88KG 8-bit OTP microcontroller with UART and Three Multi-Function Timers
File format: PDF Size:452 KB
National COP87L88KG handbook
The COP87L88KG OTP microcontroller is a member of the COP8TM feature family using an 8-bit core architecture. It is pin and software compatible to the mask ROM COP888KG product family.
File format: PDF Size:452 KB
National semiconductor COP87L88GG 8-Bit One-Time Programmable (OTP) Microcontroller handbook
COP87L88GG OTP microcontroller is an 8-bit one-time programmable (OTP) microcontroller with UART and three multi-function timers
File format: PDF Size:448 KB
National semiconductor COP87L88GD/RD Family 8-Bit CMOS OTP Microcontrollers with 16k or 32k Memory 8-Channel A/D with Prescaler handbook
COP87L88GD/RD OTP (One Time Programmable) Family microcontrollers are highly integratet COP8™ Fea- ture core devices with 16k or 32k memory and advanced features including an A/D Converter
File format: PDF Size:433 KB
National semiconductor COP87L88GD/RD Family 8-Bit CMOS OTP Microcontrollers handbook
The COP87L88GD/RD OTP (One Time Programmable) Family microcontrollers are highly integrated COP8™ Feature core devices with 16k or 32k memory and advanced features including an A/D Converter. These multi-chip CMOS devices are suited for applications requiring a full featured controller with an 8-bit A/D converter, and as pre-production devices for a masked ROM design. Pin and software compatible 16k ROM versions are available (COP888GD), as well as a range of COP8 software and hardware development tools. Family features include an 8-bit memory mapped architecture, 10 MHz CKI (-XE = crystal oscillator) with 1µs instruction cycle, three multi-function 16-bit timer/counters, MICROWIRE/PLUS™ serial I/O, one 8-bit/8-channel A/D converter with prescaler and both differential and single ended modes, two power saving HALT/IDLE modes, MIWU, idle timer, high current outputs, software selectable I/O options, WATCHDOG™ timer and Clock Monitor, 2.7V to 5.5V operation, program code security, and 44 pin package.
File format: PDF Size:433 KB
National semiconductor COP87L88EK/RK Family 8-Bit CMOS OTP Microcontrollers handbook
COP87L88EK/RK Family 8-Bit CMOS OTP Microcontrollers with 8k or 32k Memory, Comparator, and Single-slope A/D Capability
File format: PDF Size:526 KB
National semiconductor COP688EG/COP684EG/COP888EG/COP884EG/ COP988EG/COP984EG 8-Bit Microcontroller handbook
This document describes the features and characteristics of the COP8TM family of microcontrollers, including 8-bit single-chip core architecture, UART, and three multi-function timers. These microcontrollers are fabricated using National Semiconductor's M2CMOSTM process technology.
File format: PDF Size:549 KB
National semiconductor COP87L88EB/RB Family 8-Bit CMOS OTP Microcontrollers handbook(1)
COP87L88EB/RB Family 8-Bit CMOS OTP Microcontrollers with 16k or 32k Memory, CAN Interface, 8-Bit A/D, and USART
File format: PDF Size:848 KB
National semiconductor COP87L88EB/RB Family 8-Bit CMOS OTP Microcontrollers handbook
COP87L88EB/RB Family 8-Bit CMOS OTP Microcontrollers with 16k or 32k Memory, CAN Interface, 8-Bit A/D, and USART
File format: PDF Size:832 KB
National semiconductor COP87L84RG 8-Bit One-Time Programmable (OTP) Microcontroller handbook
The COP87L84RG is a member of the COP8TM OTP micro-controller family with 32 Kbytes of program memory. It features a full duplex UART, three 16-bit timers, and 32 Kbytes of on-board EPROM.
File format: PDF Size:433 KB
National semiconductor COP87L88FH 8-Bit CMOS OTP Microcontrollers handbook
The COP87L88FH OTP microcontrollers are highly integrated 8-bit CMOS devices with 16k memory and advanced features including analog comparators and hardware multiply/divide functions. These multi-chip CMOS devices are suitable for applications requiring a full-featured controller with comparators, a full-duplex USART, and hardware multiply/divide functions, as well as pre-production devices for a masked ROM design. Lower-cost pin and software compatible 12k ROM versions (COP888FH) are also available, along with a range of COP8 software and hardware development tools.
File format: PDF Size:499 KB
National semiconductor COP87L88EK/RK Family 8-Bit CMOS OTP Microcontrollers datasheet
The COP87L88EK/RK Family OTP microcontrollers are highly integrated COP8™ Feature core devices with 16k or 32k memory and advanced features including a Multi-Input Comparator and Single-slope A/D capability. These multi-chip CMOS devices are suited for applications requiring a full featured, low EMI controller with an analog comparator, current source, and voltage reference, and as pre-production devices for a masked ROM design.
File format: PDF Size:526 KB
National semiconductor COP884CG/COP888CG 8-Bit Microcontroller handbook
COP884CG and COP888CG are 8-bit microcontrollers with UART and three multi-function timers
File format: PDF Size:486 KB