ATMEL Manuals

This document describes the features and characteristics of the AT49BV640D(T) product. The product is a 2.7-volt 32-megabit Flash memory organized as 4,194,304 words of 16 bits each. It features single voltage operation, fast word program time, and low-power operation.

File format: PDF Size:364 KB

The AT49BV160D(T) is a 2.7-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each. The memory is divided into 39 sectors for erase operations. The device is offered in a 48-lead TSOP package. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single power supply, making it ideally suited for in-system programming. The device powers on in the read mode. Command sequences are used to place the device in other operation modes such as program and erase. The device has multiple sectors, each of which can be erased individually. The device also has multiple words, each of which can be programmed individually. The device has read, program, and erase pins that are used to control the device's various operation modes.

File format: PDF Size:436 KB

T89C51RD2 0 to 40MHz Flash Programmable 8-bit Microcontroller

File format: PDF Size:565 KB

T2525 is a complete IR receiver for data communication developed and optimized for use in carrier-frequency-modulated transmission applications.

File format: PDF Size:220 KB

7663B-8051 is an MCU with 80C52 compatibility and 8051 instruction compatibility, featuring six 8-bit I/O ports, three 16-bit timers/counters, 256 bytes of scratch pad RAM, 11 interrupt sources with 4 priority levels. The chip uses standard VCC power supply, integrated power monitor (POR/PFD) to supervise internal power supply, and contains serial loader for in-system programming.

File format: PDF Size:1555 KB

The document introduces a new type of programmable logic device with features such as high-density replacement for discrete logic, high-speed, and low power consumption. The device has 42 inputs and 20 sum terms, providing increased logic flexibility. The output logic is flexible, with 20 flip-flops that can be individually buried or directly output. Multiple feedback paths are available for buried state machines and I/O bus compatibility. The device is reprogrammable and uses a reliable high-speed CMOS EPROM process. It is available in 24-pin and 28-pin packages.

File format: PDF Size:549 KB

The ATF20V8B is a high performance CMOS (Electrically Erasable) Programmable Logic Device (PLD) that utilizes Atmel's proven electrically erasable Flash memory technology. Speeds down to 7.5 ns and power dissipation as low as 10 mA are offered. All speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges, and 5V ± 5% range for commercial temperature ranges.

File format: PDF Size:530 KB

The document describes a multichip module containing a field-programmable system-level integrated circuit (FPSLIC™) and secure configuration EEPROM memory. The product features 512 Kbits to 1 Mbit of configuration memory with security protection and in-system programming (ISP). The FPSLIC is an SRAM-based FPGA with an embedded high-performance RISC AVR® core and extensive data and instruction SRAM. It also includes a patented SRAM-based AT40K FPGA with 5,000 to 40,000 gates and FreeRAM™ feature, making it ideal for dynamically reconfigurable and low-power applications. The product utilizes a patented AVR enhanced RISC architecture with 120+ powerful instructions, most of which can be executed in a single clock cycle. It also includes a high-performance hardware multiplier for DSP-based systems and achieves close to 1 MIPS per MHz performance. The product offers up to 36 Kbytes of dynamically allocated instruction and data SRAM, as well as JTAG interface for extensive on-chip debugging support.

File format: PDF Size:257 KB

AT76C111 is a low-power digital camera control chip that integrates DSP and video encoder, supports SDRAM and various storage cards, and can be widely used in consumer digital cameras, portable digital camcorders, industrial vision systems, etc.

File format: PDF Size:45 KB

This document introduces the features and characteristics of AT6000 series SRAM-based field programmable gate arrays (FPGAs), including high performance, low power consumption, programmable clock options, and independently configurable I/O.

File format: PDF Size:402 KB

The document describes the features and characteristics of the AT24C32A/64A products, including low-voltage and standard-voltage operation, low-power devices, internally organized 4096 x 8, 8192 x 8, two-wire serial interface, Schmitt trigger, bidirectional data transfer protocol, etc.

File format: PDF Size:672 KB

File format: PDF Size:0 KB

AT24C01A/02/04/08A/16A series is a 1024/2048/4096/8192/16384 bits serial electrically erasable and programmable read-only memory (EEPROM) organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. AT24C01A/02/04/08A/16A are available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 (AT24C01A/AT24C02/AT24C04), 8- lead TSSOP, and 8-ball dBGA2 packages and is accessed via a Two-wire serial inter- face. In addition, the entire family is available in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) two supply voltages.

File format: PDF Size:431 KB

This document introduces the features and characteristics of AT49F080, including single voltage operation, fast read access time, internal program control and timer, 16K bytes boot block lockout, fast erase cycle time, byte programming, hardware data protection, data polling to detect end of program, low power dissipation and typical 10,000 write cycles.

File format: PDF Size:99 KB

This document describes the features of AT45DB021D, AT45DB021D is a 2.7V, serial-interface Flash memory, ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications.

File format: PDF Size:1554 KB

AT24C512 is a serial electrically erasable and programmable read only memory (EEPROM) with features of low power and low voltage operation. It has an internally organized structure of 65,536 x 8 bits, with a two-wire serial interface, Schmitt triggers, and filtered inputs for noise suppression. The product supports bidirectional data transfer protocol, compatibility with multiple operating voltages (2.7V to 5.5V, 1.8V to 3.6V) and different frequencies (1 MHz, 400 kHz, 100 kHz). It also features a write protect pin, 128-byte page write mode, self-timed write cycle, high reliability (100,000 write cycles, 40 years data retention), etc. It can be used in industrial and commercial applications.

File format: PDF Size:378 KB

This document describes the features and characteristics of the STC15W408AS series microcontrollers.

File format: PDF Size:2609 KB

DVK90CAN1 is a development board that can be used to develop AT90CAN128 microcontroller. This manual describes the features of the development board, its use and how it is used in the system.

File format: PDF Size:4322 KB

The AT45DB321C is an SPI compatible, serial-interface Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data- storage applications. The AT45DB321C supports a 4-wire serial interface known as RapidS for applications requiring very high speed operations. Its 34,603,008 bits of memory are organized as 8192 pages of 528 bytes each. In addition to the 33-megabit main memory, the AT45DB321C also contains two SRAM buffers of 528 bytes each. The buffers allow the receiving of data while reprogramming the flash array.

File format: PDF Size:603 KB

This document introduces the features and characteristics of the 4129L-CAN product

File format: PDF Size:1928 KB