CYPRESS Manuals

Describes the features and characteristics of Cypress Semiconductor Corporation CY7C65113C USB Hub with Microcontroller

File format: PDF Size:2470 KB

CY2292 is a three PLL general-purpose EPROM programmable clock generator, which features low-skew, low-jitter, high-accuracy outputs, power-management options, frequency select option, smooth CPUCLK slewing, configurable 3.3V or 5V operation.

File format: PDF Size:190 KB

enCoRe™ II Low-Speed USB Peripheral Controller CY7C63310 CY7C638xx CY7C639xx is a product of Cypress Semiconductor Corporation, including crystal oscillator, 3.3V regulator, USB pull-up resistor, configurable IO, USB specification, enhanced 8-bit microcontroller, internal memory, auto-configurable interface, low power consumption, in-system re-programmability, general-purpose I/O ports

File format: PDF Size:1647 KB

This datasheet provides detailed information on the features and characteristics of the enCoRe™ USB CY7C63221/31A.

File format: PDF Size:1042 KB

This document introduces the features and characteristics of EZ-USB NX2LP-Flex™ Flexible USB NAND Flash Controller CY7C68033/CY7C68034

File format: PDF Size:801 KB

This data sheet describes the features and characteristics of the enCoRe™ USB Combination Low-Speed USB and PS/2 Peripheral Controller CY7C63722, CY7C63723 and CY7C63743. This is a flexible, cost-effective solution for applications that combine PS/2 and low-speed USB, such as mice, game-pads, joysticks and many others.

File format: PDF Size:1054 KB

enCoRe™ USB Combination Low-Speed USB and PS/2 Peripheral Controller is a flexible, cost-effective solution for applications that combine PS/2 and low-speed USB, such as mice, game-pads, joysticks, and many others. The device has an internal oscillator, which eliminates the need for an external crystal or resonator. The interface can automatically configure to operate as PS/2 or USB, without the need for external components to switch between modes. The device also has an internal 3.3V regulator for the USB pull-up resistor and configurable GPIO for real-world interface, without external components.

File format: PDF Size:2016 KB

CY7C63001A and CY7C63101A are universal serial bus microcontrollers produced by Cypress Semiconductor Corporation. They are low-cost solutions for low-speed USB peripherals such as mouse, joystick, and gamepad. They conform to USB 1.5 Mbps Specification, Version 1.1, and support one device address and two endpoints (one control endpoint and one data endpoint). The microcontrollers feature an 8-bit RISC architecture with a 6MHz external ceramic resonator and 12MHz internal operation. The internal memory includes 128 bytes of RAM and 4KB of EPROM. It also has an integrated USB transceiver, up to 16 Schmitt trigger I/O pins with internal pull-up, and up to eight I/O pins with LED drive capability. It supports maskable interrupts on all I/O pins. Additionally, it includes an 8-bit free-running timer, watchdog timer (WDT), internal power-on reset (POR), Instant-On Now™ for Suspend and Periodic Wake-up Modes, improved output drivers to reduce EMI, and operates at a voltage range of 4.0V to 5.25VDC and temperature range of 0–70°C. It is available in space-saving and low-cost 20-pin PDIP, 20-pin SOIC, and 24-pin QSOP packages. The microcontrollers are supported by industry-standard programmers.

File format: PDF Size:496 KB

This document introduces the features of the CY7C63001C/CY7C63101C USB microcontrollers, which are low-cost USB peripherals for low-speed devices such as mice, joysticks, and gamepads.

File format: PDF Size:1077 KB

File format: PDF Size:0 KB

This document is a reference manual for the CY7C63411/12/13, CY7C63511/12/13, and CY7C63612/13 series low-speed USB peripheral controllers. It introduces the features and characteristics of these devices, functional overview, pin assignments, programming model, instruction set, memory organization, clocking, reset, general purpose I/O ports, DAC port, USB serial interface engine (SIE), USB device, 12-bit free-running timer, and processor status and control registers.

File format: PDF Size:298 KB

CY7C65013 CY7C65113 is a USB Hub with Microcontroller product produced by Cypress Semiconductor Corporation, which has various features and characteristics.

File format: PDF Size:423 KB

This document describes the features and characteristics of CY7C68013A/14A/15A/16A EZ-USB FX2LP™ USB Microcontroller, including USB 2.0 certification, integrated USB 2.0 transceiver, smart SIE, enhanced 8051 microprocessor, and compatibility with FX2.

File format: PDF Size:1981 KB

CY7C63722/23 CY7C63742/43 is an enCoRe™ USB combination product that integrates low-speed USB and PS/2 peripheral controller. This document describes the features and functions of this product.

File format: PDF Size:426 KB

The EZ-USB FX2LP USB Microcontroller CY7C68013A/CY7C68014A CY7C68015A/CY7C68016A is a single-chip integrated USB 2.0 transceiver, smart SIE, and enhanced 8051 microprocessor that is pin-compatible, object-code-compatible, and functionally-compatible with the FX2, and features ultra low power, making it ideal for bus and battery powered applications.

File format: PDF Size:1862 KB

This document describes the features of the WirelessUSB™ LS 2.4 GHz DSSS Radio SoC CYWUSB6932 and CYWUSB6934 produced by Cypress Semiconductor Corporation. These chips have a 2.4 GHz radio transceiver that operates in the unlicensed Industrial, Scientific, and Medical (ISM) band (2.4 GHz–2.483 GHz). They have a receive sensitivity of -90 dBm, an output power of up to 0 dBm, a range of up to 10 meters or more, and a data throughput of up to 62.5 kbits/sec. Additionally, these chips are highly integrated, require minimal external components, support an SPI microcontroller interface, and have an operating voltage range of 2.7V to 3.6V and an operating temperature range of 0°C to 70°C.

File format: PDF Size:329 KB

This datasheet provides detailed information on the CY7C68000 TX2™ USB 2.0 UTMI Transceiver, including features, applications, pin assignments, packages, and physical dimensions.

File format: PDF Size:121 KB

This is a quick start and user guide for the Cypress USB to serial reference design. The guide includes steps for setting up the development kit, customizing the firmware, connecting the serial device, enumerating the device, and testing the firmware.

File format: PDF Size:153 KB

The CY7C1041 is a high-performance CMOS static RAM with high speed, low power consumption, 2.0V data retention and other features.

File format: PDF Size:183 KB

This document is a description of Cypress Semiconductor Corporation's CY7C67200, introducing the product's features and applications.

File format: PDF Size:614 KB