VISHAY Manuals (Industrial)

The Vishay 0603 SMD LED has an extremely small package size and outstanding brightness, making it suitable for small-scale, high-power products in harsh environments

File format: PDF Size:188 KB

Si4858DY Vishay Siliconix New Product is a N-Channel 30-V (D-S) MOSFET with excellent performance. It is suitable for DC/DC Converters and Synchronous Rectifiers applications.

File format: PDF Size:43 KB

The TFDU8108 transceiver is a low-power consumption infrared transceiver module compliant with the IrDA physical layer standard for VFIR infrared data communication. It supports speeds up to 16 Mbit/s (VFIR) and carrier-based remote control modes up to 2 MHz. The module integrates a PIN photodiode, an infrared emitter (IRED), and a low-power BiCMOS control IC. It is available in the BabyFace package, providing flexibility for various applications and space constraints. The transceiver can directly interface with a wide variety of I/O devices and requires only a VCC bypass capacitor to implement a complete solution.

File format: PDF Size:819 KB

Vishay Siliconix current-sensing power MOSFETs offer a simple means of incorporating a protection feature into an electronic control circuit and avoiding catastrophic failures resulting from overcurrent (overload) and/or short-circuit conditions. The device package is a modified D2PAK with five pins. The MOSFET termination retains the standard D2PAK footprint for a three-pin device. The additional two pins provide termination for a current-sense output and an internal Kelvin connection to the source. For current sensing, the MOSFET design employs a small number of the total number of MOSFET cells in a known ratio. The latter define the current-sense parameters. A typical control interface uses a simple circuit with an op-amp or a comparator. This approach offers the freedom of control-level setting and facilitates its incorporation into the main control system.

File format: PDF Size:69 KB

The document introduces a high-precision foil resistor with a TCR of ±2.0 ppm/°C, a tolerance of ±0.005%, and a load life stability of ±0.005%. The product, based on Vishay's Bulk Metal® Foil technology, offers low TCR, excellent load life stability, tight tolerance, fast response time, low current noise, low thermal EMF, and low voltage coefficient, all in one resistor.

File format: PDF Size:125 KB

TEMT6000 is an ambient light sensor produced by vishay company. This sensor has high sensitivity, adapted to human eye responsivity, wide angle of half sensitivity, surface mount package and other characteristics, which are widely used in controlling LCD display brightness, mobile device keypad backlight and industrial on/off lighting.

File format: PDF Size:119 KB

TP0101K is a low-threshold P-channel 20-V (D-S) MOSFET from Vishay Siliconix. It is ESD protected and is suitable for use in driver circuits, battery-powered systems, DC/DC converters, power supply converter circuits, load/power switching, cell phones, and pagers.

File format: PDF Size:73 KB

File format: PDF Size:0 KB

Performance characteristics of Vishay Sprague 430P capacitors, including operating temperature, capacitance range, capacitance tolerance, DC voltage rating, dissipation factor, voltage test, insulation resistance, vibration test, physical characteristics, marking, DC life test, humidity test and dimensions.

File format: PDF Size:48 KB

110E is a mechanical encoder from Vishay Spectrol that provides 2-bit gray code for relative reference and 4-bit gray code for absolute reference applications. Its features are cost-effective, eliminates A/D converters, high resolution up to 36 positions, stable operating range of -40°C to +105°C, and variability for horizontal and vertical mounting.

File format: PDF Size:144 KB

Vishay Sprague model 109D tubular elastomer-sealed, sintered anode TANTALEX® capacitors are the commercial equivalents of Tansitor style WC, UWC, Mallory-NACC style TLS, TLH and the Military Style CL64 and CL65, designed to meet the performance requirements of Military Specification MIL-DTL-3965.

File format: PDF Size:91 KB

VJ X8R Dielectric is a product of Vishay Vitramon. It is a surface mount multilayer ceramic chip capacitor for high temperature applications. This product has a high operating temperature dielectric that can maintain capacity at temperatures up to +150°C, resulting in frequency stability. It is suitable for applications such as deep hole drilling electronics and high temperature modules.

File format: PDF Size:85 KB

This document provides the dimensions of the Vishay Sprague 66 594D series tantalum capacitors

File format: PDF Size:192 KB

Vishay Techno CRHV high voltage chip resistors, product features include high voltage, good stability, flow solderable, customizable size, automatic placement capability, top and wraparound terminals, with nickel barrier internationally standardized size.

File format: PDF Size:181 KB

This datasheet mainly introduces the characteristics of Vishay Siliconix Si4852DY N-Channel 30-V (D-S) MOSFET with Schottky Diode, including maximum voltage, current, power and other parameters.

File format: PDF Size:90 KB

The FX5545G008 is a low profile 3mm DC/DC buck converter from Vishay. It has an input voltage range of 0.8V to 4.5V and an output current of 3A. With a power density of over 380W/in3, it achieves high efficiency up to 95%.

File format: PDF Size:668 KB

This document is a technical specification sheet for the VISHAY TLHK5800 product, including product features, application scenarios, parameters and performance.

File format: PDF Size:164 KB

TN2404K/TN2404KL/BS107KL is a high-performance N-channel MOSFET from Vishay Siliconix. It features low on-resistance, low power/voltage drive, low input and output leakage, etc. It is mainly used in high-voltage drivers, telephone mute switches, ringer circuits, power supplies, converters, motor control, etc.

File format: PDF Size:88 KB

This document details the features and characteristics of the VISHAY TLDR5400 LED

File format: PDF Size:183 KB

TLMB1100, TLMG1100, TLMO1100, TLMP1100, TLMS1100, TLMY1100 are SMD 0603 standard LEDs produced by Vishay Semiconductors. They have extremely small package size and the highest working temperature can reach 100 °C. They can be used in various applications such as backlight keypads, navigation systems, mobile phone displays and industrial control displays.

File format: PDF Size:208 KB