VISHAY Manuals (Industrial)

FX5545G008 is a Vishay low profile 3mm DC/DC buck converter with input voltage range of 2.5V to 6V, output voltage range of 0.8V to 4.5V, output power of 10W and maximum current of 3A.

File format: PDF Size:668 KB

This document describes the features and characteristics of the BAR63V-02V RF PIN diode, including low forward resistance, small reverse capacitance, and high isolation. The product is suitable for frequency tuning applications in wireless, mobile, and TV systems.

File format: PDF Size:150 KB

This datasheet lists the parameters of the IHSM-5832 inductor, including inductance, inductance tolerance, maximum current, operating temperature, and package type.

File format: PDF Size:99 KB

2322 615 4.. Vishay BCcomponents NTC Thermistors is a surface mount NTC thermistor produced by Vishay. Its features are high sensitivity, high accuracy, suitable for wave soldering and reflow soldering, and suitable for applications such as battery chargers, consumer equipment, and office equipment.

File format: PDF Size:134 KB

The TSOP28..PM1 is a miniaturized receiver for infrared remote control systems with an internal filter that provides reliable functionality.

File format: PDF Size:135 KB

The CWR11 series is Vishay Sprague's TANTAMOUNT® military solid tantalum chip capacitors that are rated for operation from -55°C to +85°C and have a voltage rating of 4 WVDC to 50 WVDC. These capacitors have a capacitance range of 0.10µF to 100µF and are available with ±20%, ±10% and ±5% tolerances. The CWR11 series capacitors are available in four different case codes and offer multiple termination and surge current options.

File format: PDF Size:148 KB

BPV10NF is a high sensitive and wide bandwidth PIN photodiode in a standard T-1¾ plastic package. The black epoxy is a universal IR filter, spectrally matched to GaAs (λ = 950 nm) and GaAlAs (λ = 870 nm) IR emitters. BPV10NF is optimized for serial infrared links according to the IrDA standard. Features include extra fast response times, high modulation bandwidth (>100 MHz), high radiant sensitivity, radiant sensitive area A = 0.78 mm2, low junction capacitance, standard T-1¾ (∅ 5 mm) package with universal IR filter, angle of half sensitivity ϕ = ± 20°.

File format: PDF Size:122 KB

TSAL6100 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology from Vishay Semiconductors. It features extra high radiant power and radiant intensity, high reliability, low forward voltage, suitable for high pulse current operation, and good spectral matching to Si photodetectors. It is suitable for applications such as infrared remote control units with high power requirements, free air transmission systems, infrared source for optical counters and card readers, IR source for smoke detectors.

File format: PDF Size:139 KB

This document describes the TLC series of ultrabright LEDs from Vishay Semiconductors, including red, yellow, true green, and blue LEDs. These LEDs feature high luminous intensity, high operating temperature, and optimized viewing angles, making them suitable for high-end applications.

File format: PDF Size:87 KB

Vishay Semiconductors VLMP31.. SMD LED in PLCC-2 Package is a high brightness SMD LED produced by Vishay company. It meets the RoHS standard and is compatible with automatic placement equipment. It can be used in automotive, telecommunications, audio and video equipment, office equipment and other fields.

File format: PDF Size:173 KB

CNY17F is an optocoupler consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon planar phototransistor detector in a plastic plug-in DIP-6 package. It has features such as isolation test voltage, no base terminal connection for improved common mode interface immunity, and long term stability.

File format: PDF Size:1959 KB

This document introduces the features and characteristics of Vishay Semiconductors VLM.33.. series. The series products use (AS) AlInGaP technology and can be used on 8mm tapes. The package units are categorized by luminous intensity and color. The luminous intensity ratio of each package unit is less than 1.6. The thermal resistance is R = 400 K/W. The ESD-withstand voltage is up to 2 kV, and meets the JEDEC Level 2a preconditioning requirements. It is compatible with Reflow, vapor phase and wave solder processes, meets CECC 00802 and J-STD-020C requirements, meets RoHS 2002/95/EC and WEEE 2002/96/EC requirements, and meets AEC-Q101 19225 e3 standard.

File format: PDF Size:179 KB

File format: PDF Size:0 KB

This document is the datasheet of Vishay Semiconductors VLMF31.., which provides a detailed introduction of the product's features and characteristics.

File format: PDF Size:194 KB

The TELUX™ series is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed with super bright, AllnGaP, OMA technology. The supreme heat dissipation of TELUX™ allows applications at high ambient temperatures. All packing units are binned for luminous flux, forward voltage and color to achieve the most homogenous light appearance in application. SAE and ECE color requirements for automobile application are available for color red. ESD resistivity 2 kV (HBM) according to MIL STD 883D, method 3015.7.

File format: PDF Size:417 KB

File format: PDF Size:0 KB

This document mainly introduces the features and characteristics of Vishay Semiconductors VLMY31 SMD LED, including the product using lead (Pb) harmless products - RoHS standard, with excellent brightness, compatible with automatic placement equipment, in line with EIA and ICE standard packaging, compatible with IR-Reflow, vapor phase and wave soldering processes, with low power consumption and other features.

File format: PDF Size:181 KB

VISHAY TSOP312 is a miniaturized receiver for infrared remote control systems. It features a PIN diode and preamplifier assembled on a lead frame, with an epoxy package designed as an IR filter. The receiver supports a 3V supply voltage and is compatible with major transmission codes.

File format: PDF Size:221 KB

The VISHAY TSOP41 series are miniaturized receivers for infrared remote control systems. They operate with short burst transmission codes and high data rates. The product integrates a photo detector and preamplifier, with an internal filter for PCM frequency and improved shielding against electrical field disturbance. It is compatible with TTL and CMOS, has low power consumption, and high immunity against ambient light.

File format: PDF Size:232 KB

The MCT6H / MCT62H is a dual-channel optocoupler with a phototransistor output. It features a typical current transfer ratio (CTR) of 100%, an isolation test voltage (VISO) of 5000VRMS, a low temperature coefficient of CTR, a low coupling capacitance of 0.3pF, a wide ambient temperature range, and is a lead-free component.

File format: PDF Size:159 KB