ST Manuals (Industrial)

This document provides preliminary information on a new product currently in development or undergoing evaluation. Details are subject to change.

File format: PDF Size:1897 KB

This document describes the features and characteristics of a 64 Kbit (8K x 8) parallel EEPROM chip called M28C64. The chip has fast access time, software data protection, low power consumption, fast byte and page write capabilities, and enhanced write detection and monitoring. It also has JEDEC approved pin-out and software data protection. The chip supports 100,000 erase/write cycles and has a data retention of up to 40 years.

File format: PDF Size:154 KB

This document introduces the features and characteristics of M95040, M95020, M95010 4Kbit, 2Kbit and 1Kbit Serial SPI Bus EEPROM With High Speed Clock, including compatible with SPI Bus Serial Interface (Positive Clock SPI Modes), single supply voltage, high clock rate, status register, byte and page write, self-timed programming cycle, adjustable size read-only EEPROM area, enhanced ESD protection, more than 1 million erase/write cycles, more than 40 years of data storage

File format: PDF Size:533 KB

The SM6HTxxA is a high-performance Transil designed for use in high-temperature environments such as automotive applications. It uses high reliability planar technology to achieve high performance in voltage regulation mode and extremely low leakage current at high temperatures.

File format: PDF Size:49 KB

TSV991-TSV992-TSV994 are single, dual and quad operational amplifiers from Texas Instruments with low input offset voltage (1.5 mV), high output current (35 mA), wide bandwidth (20 MHz) and low power consumption (1.1 mA). It is suitable for battery-powered applications, portable devices, signal conditioning, active filtering, medical instrumentation and automotive applications.

File format: PDF Size:516 KB

This document describes a high voltage power Schottky rectifier with features including high junction temperature capability, good trade-off between leakage current and forward voltage drop, low leakage current, and specified avalanche capability.

File format: PDF Size:79 KB

STV8102 is a low-power controller chip for Organic Light Emitting Diode (OLED) dot passive matrix display systems. The STV8102 supports black-and-white monochrome displays with a definition of up to 128 columns and 64 rows. The STV8102 provides all necessary functions in a single chip, including on-chip OLED supply control and bias current generators, resulting in a minimum of external components and in very low-power consumption.

File format: PDF Size:599 KB

The STE2004S is a low power CMOS LCD controller driver. Designed to drive a 65 rows by 102 columns graphic display, it provides all necessary functions in a single chip, including on-chip LCD supply and bias voltages generators, resulting in a minimum of externals components and in a very low power consumption.

File format: PDF Size:1272 KB

This document is the User's Guide for the ST Secure MICR Printer, providing information on the features and characteristics of the printer, as well as MICR technology and error messages.

File format: PDF Size:460 KB

The SD1728 is a 50V epitaxial silicon NPN planar transistor designed primarily for SSB and VHF communications. This device utilizes emitter bal- lasting for improved ruggedness and reliability.

File format: PDF Size:140 KB

M50FW080 is an 8 Mbit (1M x8, Uniform Block) 3V Supply Firmware Hub Flash Memory, and its main features are VCC = 3V to 3.6V for Program, Erase and Read Operations, VPP = 12V for Fast Program and Fast Erase, as well as 5 Signal Communication Interface supporting Read and Write Operations, Hardware Write Protect Pins for Block Protection, Register Based Read and Write Protection.

File format: PDF Size:346 KB

The document describes the features of M95320 and M95640 series 32Kbit and 64Kbit Serial SPI Bus EEPROMs in May 2005, including compatibility with SPI Bus Serial Interface, single supply voltage, multiple clock rates, write time, status register, hardware protection, self-timed programming cycle, adjustable size read-only EEPROM area, enhanced ESD protection, more than 100,000 or 1 million erase/write cycles, and more than 40-year data retention.

File format: PDF Size:633 KB

The STP16CL596 is a monolithic, low voltage, low current power 16-bit shift register designed for LED panel displays. It contains a 16-bit serial-in, parallel-out shift register that feeds a 16-bit D-type storage register. Sixteen regulated current sources are provided in the output stage to drive the LEDs with constant current ranging from 15 to 90mA. The output current of the STP16CL596 can be adjusted by an external resistor to control the light intensity of the LEDs. It can drive up to 16V output, allowing users to connect more LEDs in series. The device has a high clock frequency of 25MHz, meeting the requirements of high volume data transmission. The 3.3V voltage supply is suitable for interfacing with any 3.3V microcontroller. The TSSOP exposed pad package improves heat dissipation capability by a factor of 2.5 compared to a standard TSSOP package.

File format: PDF Size:556 KB

The document is an introduction to the UM0121 user manual, which provides an easy way to configure motor control system parameters, including motor type, pole pairs, and control method, etc. Additionally, the document mentions that some features of the GUI are currently disabled and cannot be used.

File format: PDF Size:809 KB

The TBA820M is a 1.2W audio amplifier with a working voltage range of 3V-16V, and can be used in portable radios, cassette recorders and players.

File format: PDF Size:78 KB

STV8105 is a low-power, controller/driver “combo” IC for OLED displays. It supports 256 columns by 72 rows with 16 levels of gray for monochrome and 2 x 128 columns by 72 rows with 16 levels of gray for “two” color displays.

File format: PDF Size:1096 KB

PD57006 is an N-Channel, enhancement-mode lateral Field-Effect RF power transistor designed for high gain, broad band commercial and industrial applications. It operates at 28 V in common source mode at frequencies of up to 1 GHz.

File format: PDF Size:283 KB

The product is a pressure transmitter with the following features: pressure range from -5% till +105% FS, adjustable up to 1:4, measuring range of 0 … 50 mbar and 0 … 1000 bar, output signal of 4 . 20 mA, calibration available for all common pressure units mH20, mWs, mWC etc., adjustable delay, reverse polarity and short circuit protected, active temperature compensation (option)

File format: PDF Size:1382 KB

STTH310/S is a high voltage ultrafast rectifier produced by ST company. It has low forward voltage drop, high reliability, high surge current capability, soft switching and other characteristics. It is suitable for power supplies and other power switching applications.

File format: PDF Size:45 KB

BUT30V is a high-current power bipolar module with very low Rth junction case. The rated current is up to 100A and it has low internal parasitic inductance. It is mainly used in motor control, SMPS and UPS.

File format: PDF Size:338 KB