Philips Manuals (Industrial)

FEATURES

File format: PDF Size:136 KB

The 74HC/HCT595 are high-speed Si-gateCMOSdevices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT595 is an 8-stage serial shift register with a storage register and 3-state outputs. The shift register and storage register have separate clocks.

File format: PDF Size:182 KB

FEATURES

File format: PDF Size:127 KB

The TDA 1516BQ is an integrated class-B output amplifier in a 13-lead single-in-line (SlL) plastic power package.The device is primarily developed for car radio applications.

File format: PDF Size:107 KB

BZX585 series is a low-power voltage regulator diodes encapsulated in an ultra small SOD523 plastic SMD package. The diodes are available in the normalized E24 ± 2 % (BZX585-B) and ± 5 % (BZX585-C) tolerance range. The series consists of 37 types with nominal working voltages from 2.4 V to 75 V.

File format: PDF Size:76 KB

File format: PDF Size:162 KB

The SA614A is an improved monolithic low-power FM IF system incorporating two limiting intermediate frequency amplifiers, quadrature detector, muting, logarithmic received signal strength indicator, and voltage regulator. The SA614A features higher IF bandwidth (25MHz) and temperature compensated RSSI and limiters permitting higher performance application compared with the SA604. The SA614A is available in a 16-lead dual-in-line plastic and 16-lead SO (surface-mounted miniature) package.

File format: PDF Size:170 KB

SA612A is a low power VHF monolithic double-balanced mixer with on-board oscillator and voltage regulator, intended for low cost, low power communication systems with signal frequencies to 500MHz and local oscillator frequencies as high as 200MHz.

File format: PDF Size:114 KB

File format: PDF Size:482 KB

File format: PDF Size:1016 KB

File format: PDF Size:382 KB

SMA BZG01 series voltage regulator diodes are products of Philips Semiconductors. They feature glass passivation, high maximum operating temperature, low leakage current, excellent stability, and UL 94V-O classified plastic package. The working voltage range of this series is 10 to 270V, and it is suitable for surface mount automotive applications.

File format: PDF Size:36 KB

74F07 is a Philips Semiconductors hex inverter/buffer drivers (open-collector)

File format: PDF Size:72 KB

This manual describes the operation and maintenance of the Honda Generator: EB6500

File format: PDF Size:2450 KB

The document describes the features and characteristics of a product called FORERUNNER, including shock button, speaker, connector socket, battery, etc.

File format: PDF Size:1017 KB

The SC68C752B is a dual Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s. It offers enhanced features such as a Transmission Control Register (TCR), FIFO Rdy register, internal loopback capability, error indications, operational status, and modem interface control.

File format: PDF Size:237 KB

The SC68C752B is a dual Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s. It has a Transmission Control Register (TCR) that stores receiver FIFO threshold levels to start/stop transmission during hardware and software flow control. With the FIFO Rdy register, the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loop-back capability allows on-board diagnostics. The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or 8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can detect FIFO underflow. The UART also contains a software interface for modem control operations, and has software flow control and hardware flow control capabilities. The SC68C752B is available in

File format: PDF Size:237 KB

The Philips Semiconductors SC68C562 is a CMOS dual universal serial communications controller (CDUSCC) that provides two independent, multi-protocol, full-duplex receiver/transmitter channels in a single package. It supports bit-oriented and character-oriented synchronous data link controls as well as asynchronous protocols. The SC68C562 interfaces to the 68000 MPUs via asynchronous bus control signals and is capable of program-polled, interrupt driven, block-move or DMA data transfers. It is hardware and software compatible with the SCN68562 (NMOS version). Each channel of the SC68C562 consists of a receiver, a transmitter, a 16-bit multifunction counter/timer, a digital phase-locked loop (DPLL), a parity/CRC generator and checker, and associated control circuits. The two channels share a common bit rate generator (BRG), operating directly from a crystal or an external clock.

File format: PDF Size:171 KB

File format: PDF Size:0 KB

PDIUSBP11 is a one chip generic USB transceiver. It is capable of transmitting and receiving serial data at both full speed (12Mbit/s) and low speed (1.5Mbit/s) data rates.

File format: PDF Size:115 KB