intersil Manuals (Industrial)

intersil X98024 handbook

This document is the datasheet of Intersil X98024 240MHz Triple Video Digitizer with Digital PLL

File format: PDF Size:296 KB

intersil EL8171 EL8172 handbook

EL8171, EL8172 Micropower, Single Supply, Rail-to-Rail Input-Output Instrumentation Amplifiers

File format: PDF Size:819 KB

intersil CA3094 CA3094A CA3094B Data Sheet

The CA3094 is a high output current operational transconductance amplifier with a frequency bandwidth of 30MHz, which can be used in various circuits

File format: PDF Size:241 KB

intersil ISL84780 handbook

ISL84780 is an Intersil low voltage, single-supply, quad 2:1 analog multiplexer.

File format: PDF Size:407 KB

intersil ISL6524 handbook

The ISL6524 is a power control and protection chip that integrates a PWM controller and three linear controllers. It provides power control and protection for four output voltages in high-performance microprocessor and computer applications. The chip integrates one PWM controller and three linear controllers, as well as monitoring and protection functions. The PWM controller regulates the microprocessor core voltage with a synchronous-rectified buck converter. One linear controller supplies power for the computer system's AGTL+ 1.2V bus. The other two linear controllers regulate power for the 1.5V AGP bus and the 1.8V power for the chip set core voltage and/or cache memory circuits. The ISL6524 includes an Intel VRM8.5 compatible, TTL 5-input digital-to-analog converter (DAC) that adjusts the microprocessor core-targeted PWM output voltage from 1.050V to 1.825V in 25mV steps. The precision reference and voltage-mode control provide ±1% static regulation. The linear regulators use external N-channel MOSFETs or bipolar NPN pass transistors to provide fixed output voltages of 1.2V ±3% (VOUT2), 1.5V ±3% (VOUT3), and 1.8V ±3% (VOUT4). The ISL6524 monitors all the output voltages and issues a delayed-rising VTT (VOUT2 output) Power Good signal before the core PWM starts to ramp up. Another system Power Good signal is issued when the core is within ±10% of the DAC setting and all other outputs are above their under-voltage levels. The chip also has built-in overvoltage protection.

File format: PDF Size:437 KB

intersil 82C52 handbook

The 82C52 is a single-chip high-performance programmable Universal Asynchronous Receiver/Transmitter (UART) and Baud Rate Generator (BRG) from Intersil Corporation. It uses Intersil Corporation's advanced Scaled SAJI IV CMOS process, supporting data rates up to 1M baud asynchronously with a 16X clock (16MHz clock frequency). The on-chip Baud Rate Generator can be programmed for any one of 72 different baud rates using a single industry standard crystal or external frequency source. When using any one of three industry standard crystals (1.8432MHz, 2.4576MHz or 3.072MHz), a unique pre-scale divide circuit can be designed to provide standard RS-232-C baud rates. A programmable buffered clock output (CO) is available and can be programmed to provide either a buffered oscillator or 16MHz digital clock output.

File format: PDF Size:260 KB

intersil ICM7211 ICM7212 handbook

The ICM7211 (LCD) and ICM7212 (LED) devices constitute a family of non-multiplexed four-digit seven-segment CMOS display decoder-drivers. The ICM7211 devices are configured to drive conventional LCD displays by providing a complete RC oscillator, divider chain, backplane driver, and 28 segment outputs. The ICM7212 devices are configured to drive common four-digit non-multiplexed direct LED displays with 28 current-limited segment outputs.

File format: PDF Size:87 KB

intersil HS-2100RH handbook

The HS-2100RH is a high frequency, 100V Half Bridge N-Channel MOSFET Driver IC, which is a functional, pin-to-pin replacement for the Intersil HIP2500 and the industry standard 2110 types.

File format: PDF Size:74 KB

intersil HIN202A thru HIN241A Data Sheet

The HIN202A-HIN241A family of high-speed RS-232 transmitters/receivers interface circuits meet all ElA high- speed RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available.

File format: PDF Size:249 KB

intersil HI5714 Data Sheet

The HI5714 is a high precision, monolithic, 8-bit, Analog-to-Digital Converter fabricated in Intersil’ advanced HBC10 BiCMOS process. It is offered in 40 MSPS, 60 MSPS, and 75 MSPS sample rates. The HI5714 delivers ±0.4 LSB differential nonlinearity while consuming only 325mW power (Typical) at 75 MSPS.

File format: PDF Size:115 KB

intersil RHRU5070 RHRU5080 RHRU5090 RHRU50100 Data Sheet

RHRU5070, RHRU5080, RHRU5090 and RHRU50100 (TA49066) are hyperfast diodes with soft recovery characteristics (tRR < 75ns). They have half the recovery time of ultrafast diodes and are silicon nitride passivated ion- implanted epitaxial planar construction. These devices are intended for use as freewheeling/clamping diodes and rectifiers in a variety of switching power supplies and other power switching applications. Their low stored charge and hyperfast soft recovery minimize ringing and electrical noise in many power switching circuits reducing power loss in the switching transistors.

File format: PDF Size:56 KB

intersil X9317 Low Noise Low Power 100 Taps handbook

The Intersil X9317 is a digitally controlled potentiometer (XDCP) with low noise, low power, and 100 tap points. It can be used as a three-terminal potentiometer for voltage control or as a two-terminal variable resistor for current control.

File format: PDF Size:330 KB

intersil X80010 X80011 X80012 X80013 handbook

X80010, X80011, X80012, X80013 are Intersil’s five-way power sequence controller with hot swap and system management function. It can achieve various DC/DC power sequencing configurations in parallel or relay modes.

File format: PDF Size:529 KB

intersil HIP6013 handbook

The HIP6013 is a buck pulse-width modulator (PWM) controller from Honeywell that provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive an N-Channel MOSFET in a standard buck topology and integrates all of the control, output adjustment, monitoring and protection functions into a single package. The output voltage of the converter can be precisely regulated to as low as 1.27V, with a maximum tolerance of ±1.5% over temperature and line voltage variations.

File format: PDF Size:106 KB

intersil X9111 handbook

This document is the datasheet of Intersil XDCP series single-chip digitally controlled potentiometer X9111, which introduces the function characteristics, usage method and other information of the product in detail.

File format: PDF Size:353 KB

intersil ISL95710 handbook

isl95710 is a digitally controlled potentiometer from intersil. it can be used as a three-terminal potentiometer or as a two-terminal variable resistor. it features non-volatile solid-state potentiometer, up/down interface and chip select enable.

File format: PDF Size:233 KB

intersil ISL90462 handbook(1)

The ISL90462 is a digitally controlled potentiometer that can be used in a variety of applications including LCD contrast control, parameter and bias adjustments, industrial and automotive control, pressure, temperature, position, chemical and optical sensors, laser diode driver biasing, gain control and offset adjustment.

File format: PDF Size:197 KB

intersil ISL84541 ISL84542 ISL84543 ISL84544 handbook

ISL84541, ISL84542, ISL84543, ISL84544 are low-voltage, single-supply, dual SPST, SPDT analog switches from Intersil. These devices are designed to operate from a single +2.7V to +12V supply and have low power consumption (5µW), low leakage currents (100pA max), and fast switching speeds (tON = 35ns, tOFF = 25ns). They are suitable for battery powered equipment that require additional functionality and can be used to reduce ASIC design risk.

File format: PDF Size:323 KB

Brands



Products