3M Manuals (Industrial)

3M Static Shielding Bag SCC 1000

3M™ Static Shielding Bag SCC 1000 is a metal-in static shielding bag that meets Mil-pRF-81705 type iii, eia 541, eia 625, Mil- hdbK-263, Mil-Std-1686, and eoS/eSd standards. It provides a static safe environment for sensitive electronic devices. The bag is made of four layers. The polyester dielectric layer and the metal layer provide Faraday effect shielding of eSd and fields. The specially processed polyethylene minimizes tribocharging. The bag is available in flat and zipper closure styles, and is coded for Qc traceability.

File format: PDF Size:842 KB

3M Tape AL-37BLK Black Polyester Film (Matte Finish) Laminated Aluminum Foil with Conductive Acrylic Adhesive Data Sh

3M AL-37BLK Black Polyester Film (Matte Finish) Laminated Aluminum Foil with Conductive Acrylic Adhesive

File format: PDF Size:245 KB

3M Shielded Compact Ribbon (SCR) Connectors 361 Series

3M™ Shielded Compact Ribbon (SCR) Connectors Boardmount Straight Plug 361 Series is a connector produced by 3M Company. It has good insulation performance and can withstand 1A current and 150V voltage. The working temperature range is -55°C to +85°C.

File format: PDF Size:228 KB

3M 400 series gas vapour respirators

File format: PDF Size:305 KB

3M Scotchfil Electrical Insulation Putty Data Sheet

ScotchfilTM Electrical Insulation Putty Data Sheet is an introduction to the features and characteristics of Scotchfil brand electrical insulation putty.

File format: PDF Size:85 KB

3M Twisted Pair Flat Cable 1700 Series

This document is an introduction to 3M's interconnect solutions. It describes the features and technical specifications of the 3M™ Twisted Pair Flat Cable .050″ 28 AWG Stranded, Mass Terminatable Pair, PVC 1700 series.

File format: PDF Size:459 KB

3M - 6 Radial Bristle Brush TA

This product is a radial brush, durable, can be used to replace wire brushes on most bench motors, suitable for general maintenance and production. The product is tough and flexible, providing faster cutting speed and more uniform finish on a variety of coatings. The product cleans with minimal pressure. The abrasive mineral is aluminum oxide and Cubitron™ abrasive grain.

File format: PDF Size:42 KB

3M EM Eye Meter Handheld ESD/EMI Event Detector EM Field RF Signal Meter

This document is the User's Guide for 3M™ EM Eye Meter Handheld ESD/EMI Event Detector, EM Field, RF Signal Meter. It describes the features and characteristics of the product, including ESD event detection, electromagnetic field measurement, and RF signal sensor.

File format: PDF Size:3507 KB

3M Workstation Monitor Checker User Guide

This document provides the user guide, warranty terms and limitations, and manufacturer information for Credence Technologies, Inc.'s Workstation Monitor Checker CTE701A product.

File format: PDF Size:1016 KB

3M Mini D Ribbon (MDR) Connectors 102 Series1

This document describes the features and characteristics of the 3M™ Mini D Ribbon (MDR) Connectors .050″ Surfacemount Vertical Receptacle - Shielded 102 Series, including reliable repetitive plugging with wiper-on-wiper contact, connection stability with interface latch design, and compatibility with IEEE 1284C interface.

File format: PDF Size:1655 KB

3M Australia 3M Wrist Strap - Adjustable Elastic Fabric (Premium Performance) 2204

3M™ Wrist Strap - Adjustable Elastic Fabric (Premium Performance) is an adjustable wrist strap that provides reliable 360-degree protection for most wrist sizes. It features a band made of a silver-plated, monofilament, continuous thread woven together with elastic nylon to allow full conductivity, comfort and reliability, while providing rapid and continuous drain of static charge.

File format: PDF Size:118 KB

3M 8835 Respirator Data Sheet

The document introduces a respirator product that complies with the new European standard EN149: 2001. The product has passed the main performance tests, including filter penetration, total inward leakage, flammability, breathing resistance, and performance. It provides an Assigned Protection Factor of 20* (Nominal Protection Factor of 50), which can be used in atmospheres containing up to 20 times the Occupational Exposure Limit (OEL) of contaminant. However, the product does not protect the wearer against gases, vapours, solvents from paint spray operations, or atmospheres containing less than 19.5% oxygen. The wearer must be trained in the proper use of the product and should use it in adequately ventilated areas containing sufficient oxygen to support life. If breathing becomes difficult, dizziness or other distress occurs, the wearer should leave the area immediately. The respirator should be discarded and replaced if it becomes damaged or breathing resistance becomes excessive. The device should never be altered or modified. If the 8835 respirator is to be used for more than one shift, it should be cleaned at the end of each shift and stored between shifts in a sealed container or bag.

File format: PDF Size:207 KB

3M 3695 series

This document describes the features and characteristics of the Europlug .100″ × .200″ IDC Version, Type C (Rows A & C Filled) 3695 Series product from 3M Interconnect Solutions Division, such as compatibility with DIN 41612 Type C sockets, high density (64 positions), optional strain relief, daisy-chaining or end termination to flat cable, etc.

File format: PDF Size:27 KB

3M 102 Series DATA SHEET

3M Mini D Ribbon (MDR) Connectors .050″ Boardmount Thru-Hole Right Angle Receptacle - Shielded 102 Series is a connector produced by 3M Company. The main feature is the use of wiper-on-wiper contact, which can realize reliable repetitive plugging. The connector also supports SMT process and uses PCT insulation material and Ground lock PCB retention design to provide reliable connection for the circuit board.

File format: PDF Size:536 KB

3M minu-clamp II Plug 371 series

3M™ Mini-Clamp II Plug 2 mm, IDC, Wiremount 371 Series is a cable connector produced by 3M Company for connecting wires, which has the characteristics of easy installation, quick and reliable.

File format: PDF Size:473 KB

3M Crimplok Connectors

3M Crimplok™ Connectors are quick, easy to install connectors that offer superior performance. These connectors combine the speed of non-adhesive connectors with the performance characteristics of epoxy and hot melt connectors. Crimplok connectors are the ideal solution for quickly making fiber connections at the desk or for emergency restoration work. They save installation time, provide rugged, reliable performance, and are easy to install.

File format: PDF Size:765 KB

3M 8822 Respirator Data Sheet

This document describes the standards and performance tests of the 8822 respirator, as well as the precautions for use. The 8822 respirator is a lightweight, effective, comfortable, and hygienic respirator for dust and mist protection.

File format: PDF Size:159 KB

3M scotch 13 electrical semi-conducting tape

File format: PDF Size:128 KB

3M CF Card Header

This document describes the 3M™ CF Card Header by 3M Company. The product is a surface mount connector for CompactFlash Type II. It features high temperature thermoplastic insulation material, UL 94V-0 flammability rating, copper alloy contact material with nickel and gold plating, 0.5A current rating, 103 MΩ insulation resistance, 500VAC withstanding voltage, and temperature range of -40°C to +85°C. The product is RoHS compliant.

File format: PDF Size:290 KB

3M Overhead Air Ionizer 991 Instructions

This is an instruction manual for the 3M Overhead Air Ionizer 991. The product is an air ionizer designed to neutralize static charge on non-conductive objects and work surfaces in an electronics manufacturing environment. It is a standalone device for indoor use. The manual includes information on installation, operation, maintenance, and specifications.

File format: PDF Size:1623 KB

Brands



Products