Computers Manuals

This document describes Kingston's 512M x 64-bit (4GB) DDR3-1333 CL7 SDRAM (Synchronous DRAM), 2Rx8 memory module, based on sixteen 256M x 8-bit FBGA components. This module has been tested to run at DDR3-1333 at a low latency timing of 7-7-7-20 at 1.65V.The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9. This 240-pin DIMM uses gold contact fingers. The JEDEC electrical and mechanical specifications are as follows:

File format: PDF Size:274 KB

This document describes ValueRAM's 512M x 72-bit (4GB) DDR3L-1333 CL9 SDRAM (Synchronous DRAM), low voltage, registered w/parity, 2Rx8, ECC, VLP (very low profile) memory module, based on eighteen 256M x 8-bit DDR3L-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.

File format: PDF Size:156 KB

This is a product description document for Kingston's KHX2400C11D3K4/8GX memory module. It contains information such as the module's capacity, speed, and timing.

File format: PDF Size:327 KB

The KVR1333D3N9K2/2G 2GB (1GB 1Rx8 128M x 64-Bit x 2 pcs.) PC3-10600 CL9 240-Pin DIMM Kit is a ValueRAM memory module that uses DDR3-1333 memory. It has a single capacity of 1GB and a total capacity of 2GB. It supports CAS latency 9, 8, 7, 6. It supports 8 independent internal banks, Burst Length 8 and 4, Asynchronous Reset, On Die Termination using ODT pin, Bi-directional Differential Data Strobe, Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) and Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C.

File format: PDF Size:139 KB

This document describes the features and characteristics of ValueRAM's 8GB DDR3L-1333 CL9 SDRAM (Synchronous DRAM) memory module, including low voltage, registered with parity, 4Rx8 ECC, etc.

File format: PDF Size:151 KB

This document describes the specifications of the memory module model KVR1066D3D8R7SK3/12G, including module capacity, timing, voltage, and features.

File format: PDF Size:319 KB

KHX1333C9D3B1K2/8G 8GB (4GB 512M x 64-Bit x 2 pcs.) DDR3-1333 CL9 240-Pin DIMM Kit is a memory stick from Kingston. It uses 2Rx8 memory modules and has a total capacity of 8GB. The product supports JEDEC standard latency DDR3-1333 timing and has a power supply voltage of 1.5V.

File format: PDF Size:191 KB

This document describes the features and characteristics of ValueRAM's 1G x 72-bit (8GB) DDR3L-1333 CL9 SDRAM (Synchronous DRAM), low voltage, registered w/parity, 2Rx4 ECC memory module. It is based on thirty-six 512M x 4-bit DDR3L-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

File format: PDF Size:152 KB

The KHX6400S2ULK2/4G memory module is a 2GB DDR2 memory module with a 256M x 64-bit construction and CL4 ultra low latency timing. The total capacity is 4GB.

File format: PDF Size:260 KB

This document describes the features and characteristics of ValueRAM's 256M x 64-bit 2GB (2048MB) PC2-4200 CL3 SDRAM memory module. The module is based on sixteen 128M x 8-bit DDR2 FBGA components. The SPDs are programmed to JEDEC low latency timing of 3-3-3-8 at 1.8V. This 200-pin SODIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows:...

File format: PDF Size:243 KB

KHX5300S2LLK2/2G is a 2GB DDR2 SODIMM memory module from Kingston, consisting of two 1GB 128M x 64-bit SDRAMs.

File format: PDF Size:224 KB

This is a 4GB 512M x 64-Bit DDR3-1600 CL9 240-Pin DIMM that supports low latency timing of 9-9-9 at 1.65V.

File format: PDF Size:192 KB

Kingston's KHX8500D2K4/4G is a kit of four 128M x 64-bit 1GB (1024MB) DDR2-1066 CL5 SDRAM (Synchronous DRAM) memory modules, based on sixteen 64M x 8-bit DDR2 FBGA components per module. Total kit capacity is 4GB (4096MB). Each module kit has been tested to run at DDR2-1066MHz at a latency timing of 5-5-5-15 at 2.2V. The SPD is programmed to JEDEC standard latency 800Mhz timing of 5-5-5-18 at 1.8V. Each 240-pin DIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows:

File format: PDF Size:512 KB

Specifications of Kingston KHX6400S2LLK2/2G 2GB 200-pin SODIMM memory module, including timing, voltage, power consumption and other information

File format: PDF Size:224 KB

Kingston KHX1600C9S3K2/8GX is a 204-pin SODIMM memory with 4GB capacity, DDR3-1600 clock frequency and 9-9-9-27 low latency timing.

File format: PDF Size:320 KB

This memory is Kingston's KHX1333C7D3K2/4GX, a kit of 2GB (256M x 64-bit x 2 pcs.) DDR3-1333MHz CL7 240-pin DIMM Kit. Each module kit supports Intel® XMP (Extreme Memory Profiles). Total kit capacity is 4GB. Each module pair has been tested to run at DDR3-1333MHz at a low latency timing of 7-7-7-20 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333MHz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V. The following are JEDEC standard electrical and mechanical specifications:

File format: PDF Size:459 KB

This document describes Kingston's KHX6400S2LLK2/4G product, which is a kit of two 2GB CL5 low latency SDRAM 2Rx8 memory modules. Each module is based on sixteen 128M x 8-bit DDR2 FBGA components. The total capacity is 4GB. The SPDs are programmed to JEDEC low latency timing of 5-5-5-18 at 1.8V. Each 200-pin SODIMM uses gold contact fingers and requires +1.8V.

File format: PDF Size:262 KB

KVR1333D3D8R9SK3/12G is a kit of three 512M x 72-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), registered w/parity, 2Rx8 ECC memory modules, based on eighteen 256M x 8-bit DDR3-1333 FBGA components per module. Total kit capacity is 12GB. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9. Each 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

File format: PDF Size:151 KB

KVR1066D3E7SK3/12G is a 12GB memory module from ValueRAM. It uses DDR3-1066 CL7 SDRAM (synchronous dynamic random access memory) technology and can reach a latency of 7-7-7 at a clock frequency of 1066MHz. The module supports JEDEC standard 1.5V power and uses a 240-pin DIMM package.

File format: PDF Size:147 KB

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8 memory module, based on sixteen 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V.

File format: PDF Size:82 KB