Philips Manuals

The 74F245 is an octal transceiver from Philips with non-inverting 3-State bus compatible outputs that can be used for both transmit and receive. The B port outputs are capable of sinking 64mA and sourcing 15mA.

File format: PDF Size:100 KB

The document describes the features and characteristics of the 74F242 and 74F243 quad transceivers. The 74F242 is an inverting (3-state) transceiver, while the 74F243 is a non-inverting (3-state) transceiver. The document also includes pin configuration, ordering information, input and output loading and fan-out table, and logic symbols.

File format: PDF Size:91 KB

This document describes the features and characteristics of four products: 74F240/74F240A and 74F241/74F241A. They are octal buffers that are ideal for driving bus lines of buffer memory address registers. The outputs have three-state buffer function and can sink 64mA of current and source 15mA of current. The 74F240A/74F241A have guaranteed output skew within 2.0ns, reduced ground bounce and power consumption, and reduced loading.

File format: PDF Size:111 KB

74F2373 is an octal transparent latch with 30 Ohm equivalent output termination (3-State) for driving DRAM.

File format: PDF Size:92 KB

This document describes the features and characteristics of the Philips Semiconductors 74F225 16X5 asynchronous FIFO product, including independent synchronous inputs and outputs, organized as 16 words of 5 bits, DC to 25MHz data rate, and 3-state outputs.

File format: PDF Size:115 KB

The 74F224 is a Philips Semiconductors product. It is a 16 × 4 Synchronous FIFO with independent synchronous inputs and outputs, organized as 16 words of 4 bits each, with DC to 50MHz data rate, 3-State outputs, and is cascadable in word-width and depth direction.

File format: PDF Size:15 KB

This datasheet details the features and characteristics of the 74F2245 chip, including the eight-way bidirectional bus interface, the 30-ohm output terminator, and the high impedance state.

File format: PDF Size:98 KB

The 74F2244 is an octal buffer from Philips Semiconductors that is ideal for driving dynamic random access memory. The output termination resistance is 30 ohms, and the device can source up to 15mA of current.

File format: PDF Size:90 KB

74F20 is a dual 4-input NAND gate from Philips Semiconductors with a typical propagation delay of 3.5ns and a typical supply current of 2.2mA.

File format: PDF Size:71 KB

This PDF document is about the product specification of 74F219A 64-bit TTL bipolar RAM, which features high speed performance and non-inverting (3-State) outputs.

File format: PDF Size:95 KB

File format: PDF Size:0 KB

The 74F199 is an 8-bit Parallel Access Shift Register. It has buffered clock and control inputs, shift right and parallel load capability, fully synchronous data transfers, J-K(D) inputs to first stage, clock enable for hold (do nothing) mode and asynchronous Master Reset.

File format: PDF Size:67 KB

This document describes the product specification of 74F198 8-bit bidirectional universal shift register, including buffered clock and control inputs, shift right, shift left, and parallel load capability.

File format: PDF Size:103 KB

The 74F195A is a 4-Bit Parallel Access Shift Register produced by Philips Semiconductors. It has shift right and parallel load capabilities, J-K (D) inputs to the first stage, complement output from the last stage, and asynchronous master reset. This device is useful in a variety of shifting, counting, and storage applications. It performs serial, parallel, serial to parallel, or parallel to serial data transfers at very high speeds.

File format: PDF Size:82 KB

The 74F193 is a 4-bit synchronous up/down counter in the binary mode. It provides synchronous reversible counting, asynchronous parallel load capability, asynchronous reset (clear) and cascadable without external logic.

File format: PDF Size:108 KB

The 74F191 is a 4-bit binary counter with synchronous, reversible counting, asynchronous parallel load capability, cascadable without external logic, and single up/down control input

File format: PDF Size:108 KB

This document is about the specification of 74F189A product, including product features, characteristics, package form, supply information, etc.

File format: PDF Size:88 KB

This document describes the features and characteristics of the 74F832 and 74F1832 Hex 2-input OR drivers, including high capacitive drive capability, configuration options, typical propagation delay, superior ground noise characteristics, and increased source and sink current.

File format: PDF Size:79 KB

The 74F182 is a high-speed carry look-ahead generator produced by Philips Semiconductors.

File format: PDF Size:52 KB

This document describes the features of the 74F808 and 74F1808 Hex 2-input AND drivers. These drivers have high capacitive drive capability, a typical propagation delay of 4.0ns, superior ground noise characteristics, and increased source and sink current.

File format: PDF Size:80 KB