ROHM Manuals

BD9207FPS is a ROHM LED driver with a built-in Pch switching MOSFET and a maximum switching current of 1.5A

File format: PDF Size:356 KB

File format: PDF Size:0 KB

The product is ROHM's BU9795AKV/FV/GUW, BU9794AKV, BU97950FUV/KS2 series standard segment driver, which has ultra-low power consumption, no external components, and only driver function.

File format: PDF Size:412 KB

BU97930MUV is a multifunction LCD segment driver from ROHM. It can drive up to 108 segments (SEG27×COM4). The chip integrates display data RAM (DDRAM), LCD drive output, LED driver circuit, support PWM output, standby mode, power reset, oscillator and etc.

File format: PDF Size:798 KB

BU21008MUV is a capacitive sensor controller with 16 channels. Half of the sensor ports can be used for LED drivers with PWM function. PWM function can control ambient light. It also has gesture function to recognize short touch, long touch, and finger motion.

File format: PDF Size:678 KB

BU21009MUV is a capacitive sensor controller for switch function and slider function with 16 channels sensors. All channels are calibrated for slider functions. LED driver is available (No PWM function).

File format: PDF Size:315 KB

BU21010MUV is a capacitive sensor controller with 8 channels, half of the sensor ports are available for LED driver. It also has gesture function to recognize short touch, long touch and finger motion.

File format: PDF Size:325 KB

BU21023GUL, BU21023MUV, BU21024FV-M are 4-wire resistive touch screen controller ICs produced by ROHM. They support dual-touch detection and gesture recognition. These intelligent controllers expose a set of registers to a host processor and are software configurable. The controllers can detect single point coordinates, dual coordinates, pinch, spread, rotate left and rotate right gestures, enabling pan and zoom operations in applications that previously had to rely exclusively on capacitive touch technology. Resistive touch does not require custom panel development which reduces development cost and results in faster time to market across a family of products.

File format: PDF Size:399 KB

BU52004GUL and BU52014HFV are bipolar Hall ICs with dual output polarity detection function.

File format: PDF Size:359 KB

This document introduces the features and characteristics of ROHM's BU52002GUL,BU52003GUL,BU52012NVX,BU52012HFV,BU52013HFV Hall ICs, including unipolar detection, micropower operation, ultra-compact package, multiple supply voltages, and high ESD resistance.

File format: PDF Size:376 KB

BH1621FVC is an analog current output ambient light sensor. This IC is the most suitable to obtain the ambient light data for adjusting LCD and Keypad backlight of Mobile phone for power saving and better visibility.

File format: PDF Size:262 KB

This document describes the features and characteristics of the BH1721FVC digital ambient light sensor IC from ROHM. The sensor can obtain ambient light data through the I2C bus interface and is suitable for adjusting the LCD and keypad backlight power of mobile phones. It has a wide range and high resolution detection capability (1-65528 lx) and is compatible with various light sources. It is compact in size and does not require any external components.

File format: PDF Size:303 KB

BH1751FVI is a digital Ambient Light Sensor IC with I2C bus interface. It is most suitable for obtaining ambient light data to adjust the LCD and keypad backlight power of mobile phones. It can detect a wide range of light intensity with high resolution (1-65535 lx). The features of this product include: I2C bus interface support, spectral responsibility similar to the human eye, conversion of illuminance to digital signal, wide range and high resolution, low power consumption, light noise rejection function for 50Hz/60Hz, 1.8V logic input interface, no need for external parts, minimal light source dependency (e.g. incandescent lamp, fluorescent lamp, etc.), two selectable I2C slave addresses, adjustable measurement result for optical window influence, small measurement variation (+/- 20%), minimal influence from infrared, and built-in power on reset circuit.

File format: PDF Size:452 KB

BD9251FV is a single-chip integrated circuit that is used for human body detection applications. It has an ultra-low power design that can greatly reduce the standby power requirements of devices that are always in use, and it is space-saving, so there is no need to choose a mounting location.

File format: PDF Size:264 KB

File format: PDF Size:0 KB

This datasheet introduces the features and characteristics of ROHM BD1020HFV temperature sensor IC. The sensor has low quiescent current (4µA) and high accuracy, can detect temperature, output voltage linearly varies with temperature.

File format: PDF Size:287 KB

This document describes the features and characteristics of ROHM's Selection Operational Amplifier/Comparator Series products, including low operating voltage, full swing input and output, push-pull output type, high speed operation, and low supply current.

File format: PDF Size:465 KB

This document is about the characteristics of BU7261G, BU7261SG, BU7295HFV, BU7295SHFV, BU7262F/FVM/NUX, BU7262SF/FVM/NUX, BU7264F, BU7264SF, BU7241G, BU7241SG, BU7275HFV, BU7275SHFV, BU7242F/FVM/NUX, BU7242S F/FVM/NUX, BU7244F, BU7244SF.

File format: PDF Size:676 KB

This series of products is a low voltage CMOS operational amplifier, which is a single chip integrated with one or two independent output full swing operational amplifiers and phase compensation capacitors. It is especially suitable for applications with low voltage, low current and low input bias current.

File format: PDF Size:754 KB

Low Voltage with High Speed CMOS Op-Amp integrates one independent output full swing Op-Amps and phase compensation capacitors on a single chip. Especially, this series is operable with low voltage, low supply current, high speed and low input bias current.

File format: PDF Size:600 KB