National Manuals

The OP-07 is a low input offset voltage and low drift operational amplifier. It has very low input offset voltage which is obtained by trimming at the wafer stage. These low offset voltages generally eliminate any need for external nulling. The OP-07 also features low input bias current and high open-loop gain. The low offsets and high open-loop gain make the OP-07 particularly useful for high-gain applications. The OP-07 has a minimum input voltage range of 13V combined with a high CMRR of 110dB and high input impedance to provide high accuracy in the non-inverting circuit configuration. Excellent linearity and gain accuracy can be maintained even at high closed-loop gains. The stability of offsets and gain with time or variation in temperature is excellent. The OP-07 is available in TO-99 metal can, ceramic or molded DIP.

File format: PDF Size:176 KB

The LM139/LM239/LM339/LM2901/LM3302 is a low power low offset voltage quad comparator.

File format: PDF Size:470 KB

File format: PDF Size:0 KB

LM158/LM258/LM358/LM2904 are low power dual operational amplifiers designed for single power supply systems. They have high gain and internal frequency compensation, and can be used in applications such as transducer amplifiers and DC gain blocks.

File format: PDF Size:1013 KB

LM124/LM224/LM324/LM2902 is a low power quad operational amplifier that can be powered by a single power supply, the input common mode voltage range includes ground, the output voltage can also be pulled to ground, and the single power supply voltage range is large, and it also has temperature compensation. It can be widely used in transducer amplifiers, DC gain circuits and other applications.

File format: PDF Size:530 KB

This is the Panasonic NN-K571MFS microwave oven user manual, which introduces the characteristics and usage of the microwave oven.

File format: PDF Size:3601 KB

This is the user manual for SR-CW10, CW15, CW18 rice cookers. It includes information such as power supply, power consumption, cooking method, menu selection, keep warm temperature, cooking capacity, heat source, temperature detection, timer, buzzer, safety device, power cord, size, weight, and accessories.

File format: PDF Size:2079 KB

This document is about the user manual and selected recipes for the NN-GX35WFXNE microwave oven. The document includes specifications of the microwave oven, precautions, characteristics and cooking techniques of food, selection of cooking utensils, installation and placement, function indicators and control panel, operation methods, common recipes, cleaning and maintenance, etc.

File format: PDF Size:1135 KB

This document is an instruction manual for the OH-P32S, OH-32U, and OH-32W models of oil fan heaters (forced ventilation type open oil stoves). The document provides detailed information on the safe use precautions, names and functions of each part, preparation before use, ignition and extinguishing methods, room temperature adjustment, troubleshooting, and more.

File format: PDF Size:1725 KB

The NI SMB-214x is a shielded signal accessory for NI FlexRIO™ digitizer adapter modules (NI 5751 and NI 5752). NI SMB-214x accessories provide easy connections to other devices for testing and debugging.

File format: PDF Size:906 KB

This is a PDF file about DAC0830/DAC0832 8-bit μP compatible double-buffered D to A converters

File format: PDF Size:533 KB

TP3070, TP3071, TP3070-X COMBO® II Programmable PCM CODEC/Filter is a second-generation combined PCM CODEC and Filter device optimized for digital switching applications on subscriber line and trunk cards. Using advanced switched capacitor techniques, COMBO II combines transmit bandpass and receive lowpass channel filters with a companding PCM encoder and decoder. The devices are A-law and µ-law selectable and employ a conventional serial PCM interface capable of being clocked up to 4.096 MHz. A number of programmable functions may be controlled via a serial control port. Channel gains are programmable over a 25.4 dB range in each direction, and a programmable filter is included to enable Hybrid Balancing to be adjusted to suit a wide range of loop impedance conditions. Both transformer and active SLIC interface circuits with real or complex termination impedances can be balanced by this filter, with cancellation in excess of 30 dB being readily achievable when measured across the passband against standard test termination networks. To enable COMBO II to interface to the SLIC control leads, a number of programmable latches are included; each may be configured as either an input or an output. The TP3070 provides 6 latches and the TP3071 5 latches.

File format: PDF Size:402 KB

The ADC082S051 is a low-power, two-channel CMOS 8-bit analog-to-digital converter (ADC) with a high-speed serial interface. Unlike the conventional practice of specifying performance at a single sample rate only, the ADC082S051 is fully specified over a sample rate range of 200 kSPS to 500 kSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept one or two input signals at inputs IN1 and IN2. The output serial data is straight binary, and is compatible with several standards, such as SPI™, QSPI™, MICROWIRE, and many common DSP serial interfaces. The ADC082S051 operates with a single supply that can range from +2.7V to +5.25V. Normal power consumption using a +3V or +5V supply is 2.2 mW and 7.1 mW, respectively. The power-down feature reduces the power consumption to just 0.12 µW using a +3V supply, or 0.35 µW using a +5V supply. The ADC082S051 is packaged in an 8-lead MSOP package. Operation over the industrial temperature range of −40˚C to +85˚C is guaranteed.

File format: PDF Size:931 KB

File format: PDF Size:0 KB

Panasonic WR6161K-803 20A HID relay is a distribution board relay with rated output side 20A 300V AC and input side 0.35A 24V AC.

File format: PDF Size:44 KB

This user guide describes how to use the NI Wireless Sensor Network WSN-9791 Ethernet gateway and lists specifications. The NI WSN-9791 provides an Ethernet data acquisition interface. The NI WSN-9791 combines with NI WSN-32xx nodes to form a wireless sensor network.

File format: PDF Size:2999 KB

File format: PDF Size:0 KB

LabVIEW Foundations is an introductory tutorial about programming in LabVIEW

File format: PDF Size:1879 KB

This is an invitation for quotations for supply of goods and equipment under the National Shopping Procedures. The goods are insect proof climate control chamber, with detailed specifications listed in Annexure 1.

File format: PDF Size:97 KB

The NI 6351/6353 are NI X Series Analog Input Cards with 16-bit resolution, a maximum sample rate of 1.25 MS/s, and 50 ppm of sample rate accuracy. The cards support multiple input ranges and have a maximum working voltage of ±11 V.

File format: PDF Size:821 KB