intersil Manuals

The Intersil X90100 is a non-volatile electronically programmable capacitor with a stable dielectric and low temperature drift coefficient.

File format: PDF Size:183 KB

ISL90843 is a quad digital controlled potentiometer from Intersil. This potentiometer is manufactured using CMOS technology and has 256 resistor taps with 0.4% resolution. It is controlled via the I2C bus interface.

File format: PDF Size:718 KB

The ISL90842 is a quad digitally controlled variable resistor from Intersil, with low noise, low power, I2C bus, 256 taps.

File format: PDF Size:635 KB

The ISL90841 is a chip that integrates four digitally controlled potentiometers (XDCP). It features low noise, low power, and an I2C bus interface. Each potentiometer can be controlled by the user through the I2C bus interface. The chip can be widely used in control, parameter adjustment, and signal processing.

File format: PDF Size:1067 KB

The ISL90840 is a four-channel digitally controlled potentiometer from Intersil. It is fabricated using CMOS technology and features low noise, low power consumption, I2C bus, and 256 tap points.

File format: PDF Size:1032 KB

The X9460 is a low noise, low cost, high-end feature dual audio digitally controlled potentiometer. It integrates two digitally controlled potentiometers that can be used as stereo gain controls in audio applications. The position of the wiper on the array is controlled by the user through the 2-wire serial bus interface. The X9460 implements the digitally controlled potentiometer using 31 polysilicon resistors in a log array and connects tap points between each resistor to the wiper terminal through switches. It is designed to minimize wiper noise to avoid pops and clicks during audio volume transitions.

File format: PDF Size:275 KB

The ISL90810 is a single digitally controlled potentiometer (XDCP™) from ISL. It features low noise, low power consumption, I2C bus and 256 taps. The product can be used in a variety of applications including control, parameter adjustments and signal processing.

File format: PDF Size:1036 KB

This document is the reference manual for ISL90727, ISL90728 Single Volatile 128-Tap XDCP Digitally Controlled Potentiometer (XDCP™), which introduces the product's function, features, usage methods and application scenarios.

File format: PDF Size:159 KB

The ISL90726 is a single-channel volatile 128-tap XDCP digitally controlled potentiometer with I2C serial bus interface and low temperature coefficient. It can be used in various applications such as mechanical potentiometer replacement, adjustment of pressure, temperature, position, chemical and optical sensors, laser diode and LED biasing, LCD brightness and contrast adjustment, gain control and offset adjustment, etc.

File format: PDF Size:222 KB

The ISL23711 is a digitally controlled potentiometer that provides 128 steps of resolution and can be used in a wide variety of applications including industrial and automotive control, parameter and bias adjustments, amplifier bias and control functions.

File format: PDF Size:247 KB

The ISL23710 is a digitally controlled potentiometer (XDCP) with ±3V or ±5V terminal voltage and a 128-tap up/down interface. It can be used as a three-terminal potentiometer or a two-terminal variable resistor, and is suitable for various applications including industrial and automotive control, parameter and bias adjustments, and amplifier bias and control.

File format: PDF Size:208 KB

This document introduces Intersil X9015, a 32 tap programmable single stable digital potentiometer.

File format: PDF Size:212 KB

The ISL90462 is a digitally controlled potentiometer (XDCP) configured as a variable resistor. The device consists of a resistor array, wiper switches, a control section, and volatile memory. The wiper position is controlled by a 2-pin Up/Down interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS and U/D inputs. The device can be used in a wide variety of applications including LCD contrast control, parameter and bias adjustments, industrial and automotive control, transducer adjustment of pressure, temperature, position, chemical, and optical sensors, laser diode driver biasing, gain control, and offset adjustment.

File format: PDF Size:197 KB

The ISL90461 is an Intersil digitally controlled potentiometer (XDCP) that can be configured from 2.7V to 5.5V. It is a variable resistor comprising a resistor array, wiper switches, a control section, and volatile memory. A 2-pin Up/Down interface controls the wiper position. The potentiometer is implemented by a resistor array comprising 31 resistive elements and a wiper switching network. Between each element and at either end there are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS and U/D inputs. The device can be used in a wide range of applications including: LCD contrast control, parameter and bias adjustments, industrial and automotive control, transducer adjustment of pressure, temperature, position, chemical, and optical sensors, laser diode driver biasing, gain control and offset adjustment.

File format: PDF Size:196 KB

The ISL90460 is a digitally controlled potentiometer from Intersil that can be used in a wide variety of applications, including LCD contrast control, parameter and bias adjustments, industrial and automotive control, pressure, temperature, position, chemical and optical sensors, laser diode driver biasing, gain control and offset adjustment

File format: PDF Size:194 KB

The X9251 is a single supply/low power/256-tap/SPI bus quad digitally-controlled potentiometer. It integrates four digitally controlled potentiometers that can be controlled by the user through the SPI bus interface. The product can be used in various applications including control, parameter adjustments, and signal processing.

File format: PDF Size:291 KB

The X9250 is a quad digitally controlled potentiometer (XDCP) chip with low noise, low power, SPI bus, and 256 taps. It features four potentiometers, 256 resistor taps/pot with 0.4% resolution, SPI serial interface, 40Ω wiper resistance, four nonvolatile data registers, standby current < 5µA max, and power supplies ranging from 2.7V to 5.5V. It has high reliability with endurance up to 100,000 data changes per bit per register and data retention for 100 years. The X9250 is available in 24 Ld SOIC and 24 Ld TSSOP packages.

File format: PDF Size:295 KB

The X95840 integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated circuit. It features low noise, low power consumption, I2C bus interface, and 256 taps resolution. The position of the wipers can be controlled by the user through the I2C bus interface, and it can be used in various applications such as control, parameter adjustments, and signal processing.

File format: PDF Size:1060 KB

The X9259 is a monolithic CMOS integrated circuit that integrates four digitally controlled potentiometers (XDCP). It features 256 resistor taps, a 2-wire serial interface, and can be used in a wide range of applications including control, parameter adjustments, and signal processing.

File format: PDF Size:297 KB

The X9258 is a low noise/low power/2-wire bus/256 taps quad digital controlled potentiometers. It features four potentiometers in one package, 256 resistor taps/pot with 0.4% resolution, a 2-wire serial interface, 40Ω wiper resistance, four nonvolatile data registers for each pot, nonvolatile storage of wiper position, standby current less than 5µA, and power supplies ranging from VCC = 2.7V to 5.5V, V+ = 2.7V to 5.5V, and V- = -2.7V to -5.5V.

File format: PDF Size:281 KB