ANALOG Manuals
ANALOG DEVICES OP184/OP284/OP484 datasheet
OP184/OP284/OP484 is a precision single-supply, 4MHz bandwidth amplifier featuring rail-to-rail inputs and outputs. It is guaranteed to operate from +3 to +36 (or ±1.5 to ±18) volts and will function with a single supply as low as +1.5 volts.
File format: PDF Size:721 KB
ANALOG DEVICES OP183/OP283 handbook
OP183 / OP283 is a single-supply, 5 MHz bandwidth amplifier with slew rates of 10 V / µs. OP283 is a dual version. Both can operate from voltages as low as 3 volts and up to 36 volts. This combination of slew rate and bandwidth yields excellent single- supply ac performance making them ideally suited for telecom and multimedia audio applications. In addition to its ac characteristics, the OP183 family provides good dc performance with guaranteed 1 mV offset. Noise is a respectable 10 nV / √Hz. Supply current is only 1.2 mA per amplifier. These amplifiers are well suited for single-supply applications that require moderate bandwidths even when used in high gain configu- rations. This makes them useful in filters and instrumentation. Their output drive capability and very wide full power bandwidth make them a good choice for multimedia headphone drivers or microphone input amplifiers. The OP183 and OP283 are available in 8-pin plastic DIP and SO-8 surface mount packages. They are specified over the extended industrial (–40°C to +85°C) temperature range. One Technology Way, P.O. Box 9106, Norwood. MA 02062-9106, U.S.A. Tel: 617/329-4700 Fax: 617/326-8703 a Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or ot
File format: PDF Size:419 KB
ANALOG DEVICES OP179/OP279 handbook
File format: PDF Size:0 KB
ANALOG DEVICES OP177 handbook(1)
The document describes the features and characteristics of the ultraprecision operational amplifier OP177 Rev. E, including ultralow offset voltage and offset voltage drift, excellent open-loop gain and gain linearity, high common mode rejection ratio and power supply rejection ratio, etc.
File format: PDF Size:229 KB
ANALOG DEVICES OP177 handbook3
The OP177 is an ultraprecision operational amplifier that offers ultralow offset voltage and excellent open-loop gain. It fits industry standard precision op amp sockets (OP07/OP77). The product provides high precision performance with an offset voltage of only 10µV and temperature drift (TCVOS) of 0.1µV/°C, increasing system accuracy over temperature. It also features excellent CMRR, PSRR, and low supply current.
File format: PDF Size:229 KB
ANALOG DEVICES OP176* handbook
The document describes the features of the OP176 bipolar/JFET audio operational amplifier produced by Analog Devices, including low noise, high slew rate, wide bandwidth, low supply current, and low offset voltage.
File format: PDF Size:686 KB
ANALOG DEVICES OP162/OP262/OP462 handbook3
The OP162/OP262/OP462 are 15MHz rail-to-rail operational amplifiers, which have the advantages of wide bandwidth, low offset voltage, low noise, single-supply operation, rail-to-rail output swing, low temperature drift, high gain-bandwidth product, no phase inversion, and unity gain stable. They are suitable for applications such as portable instrumentation, sampling ADC amplifier, wireless LANs, direct access arrangement, office automation, etc.
File format: PDF Size:597 KB
ANALOG DEVICES OP11 handbook
OP11 is a four-channel matched 741-type operational amplifier produced by Analog Devices. It has very low input offset voltage and very high common-mode rejection ratio, which can be used in the design of instrumentation amplifiers.
File format: PDF Size:133 KB
ANALOG DEVICES OP1177/OP2177/OP4177 handbook
The OP1177/OP2177/OP4177 is a precision low noise, low input bias current operational amplifier produced by Analog Devices. It has high output stability and low power consumption.
File format: PDF Size:235 KB
ANALOG DEVICES OP113/OP213/OP413 handbook
The document describes the features of the OP113/OP213/OP413 series single-supply operational amplifiers, including low noise, low drift, wide bandwidth, low offset voltage, and low drift. They are suitable for applications such as digital scales, multimedia, strain gauges, and battery-powered instrumentation.
File format: PDF Size:333 KB
ANALOG DEVICES OP-10 handbook
This document contains information about the products of the OP10 supplier, describing the features and characteristics of the product.
File format: PDF Size:485 KB
ANALOG DEVICES SMP-10/SMP-11 handbook
File format: PDF Size:564 KB
ANALOG DEVICES SMP08* handbook
SMP08 is an octal sample-and-hold with low droop rate, low cost and TTL/CMOS compatible logic inputs.
File format: PDF Size:264 KB
ANALOG DEVICES SMP04* handbook
The SMP04 is a monolithic quad sample-and-hold; it has four internal precision buffer amplifiers and internal hold capacitors. It is manufactured in ADI’s advanced oxide isolated CMOS technology to obtain the high accuracy, low droop rate and fast acquisition.
File format: PDF Size:279 KB
ANALOG DEVICES AD215 handbook
The AD215 is a 120 kHz bandwidth, low distortion isolation amplifier with 1,500 V rms isolation voltage rating, fast transient response, wide bandwidth and wide output range, suitable for high precision data acquisition systems, power line and transient monitors, multichannel multiplex input isolation, waveform recording instruments, power supply controls and vibration analysis.
File format: PDF Size:235 KB
ANALOG DEVICES AD8222 Data Sheet
AD8222 is a precision dual-channel instrumentation amplifier that provides a 4mm×4mm package with low noise, high accuracy DC performance and excellent AC performance.
File format: PDF Size:411 KB
ANALOG DEVICES ADA4417-3 Data Sheet
The ADA4417-3 is a low cost, fully integrated, video reconstruction filter specifically designed for consumer high-definition video applications.
File format: PDF Size:430 KB
ANALOG DEVICES ADL5536 handbook
The ADL5536 is a 20 dB linear amplifier that operates at frequencies up to 1 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment. The ADL5536 provides the highest dynamic range available from an internally matched IF gain block.
File format: PDF Size:301 KB
ANALOG DEVICES AD620 handbook
File format: PDF Size:1309 KB
ANALOG DEVICES AD8295 handbook
File format: PDF Size:0 KB