3M Manuals

This document describes the physical, electrical, and environmental characteristics of 3M™ D Sub Plug 50 Position 8250 Series. The product is RoHS compliant and does not contain harmful substances such as lead, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers. The insulation material is glass filled polyester (PBT) with a flammability rating of UL 94V-0. The contact material is copper alloy with nickel and gold plating. The shell material is steel with nickel plating. The product has a current rating of 1 A, insulation resistance greater than 1 × 10^9Ω at 500 VDC, and can withstand a voltage of 1000 Vrms at sea level. It has a temperature rating of -55°C to +105°C. The product is IDC compatible, provides EMI/ESD protection with dimples, and has lower insertion/withdrawal force compared to other 50 position products.

File format: PDF Size:296 KB

VHB Acrylic Foam Tape 5952F is a double coated pressure sensitive adhesive tape for bonding a wide variety of substrates including lower surface energy materials such as powder coated paints and plastics.

File format: PDF Size:44 KB

3M's Hot Melt Connectors can be used in high temperature environments and are suitable for indoor and outdoor applications. These connectors have now been certified to TIA/EIA 568B standards for both indoor and outdoor use, including temperatures as high as 85°C (185°F).

File format: PDF Size:157 KB

3M™ Thermally Conductive Interface Pads 5595 and 5595S are designed to provide a preferential heat-transfer path between heat-generating components and heat sinks, heat spreaders or other cooling devices.

File format: PDF Size:100 KB

This document describes the physical, electrical, and environmental characteristics of the 3M™ Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug 361 Series. The plug features reliable repetitive plugging, lateral support for solder joints and grounding, space-saving PCB design, 360° shielding for EMI protection, ability to carry signal or power, polarization for proper cable insertion, vibration resistance, and compatibility with 3M™ Shielded Compact Ribbon (SCR) Wiremount Receptacle (TS-2227).

File format: PDF Size:217 KB

3M Ultra-R2 Rubber is a static-safe work surface that is highly resistant to solvents, hot solder, and soldering irons. It is made of a two-layer combination of static dissipative and conductive rubber materials that provide excellent electrical performance.

File format: PDF Size:54 KB

3M™ Value Duct Tape 1900 is a conformable cloth duct tape made with polyethylene film over cloth scrim and synthetic rubber adhesive. A good choice for non-critical applications.

File format: PDF Size:60 KB

The Hot Melt Termination Kits 6365 and 6361 contain all materials necessary to terminate 3M™ SC, ST, and FC Hot Melt and Ultra High Temp Hot Melt Connectors, both single-mode and multimode. There are also conversion kits that make it easy to incorporate both an epoxy process and a hot melt process into one kit.

File format: PDF Size:49 KB

Roloc RD-ZB Bristle Discs can quickly and easily remove paint, adhesive, weld burn, rust, heavy oxide and surface contaminants from large areas. No pressure required from the operator.

File format: PDF Size:34 KB

3M CF Card Ejector for CompactFlash Header, Type II, Long Guides 7E50 Series. 7E50 Series is a modular snap-on design with multiple button types for design flexibility. It can be used with either top or bottom mount (standard or inverse polarization) headers. It meets CFA standards for known compatibility and reliability.

File format: PDF Size:209 KB

3M 362 series Shielded Compact Ribbon (SCR) Wiremount Receptacle is the ideal mate for all 3M 3M™ Shielded Compact Ribbon (SCR) Boardmount and Wiremount Plugs, features robust ribbon style contact for reliable, repetitive plugging, 10 contacts can carry signal or power (up to one ampere per pin), has vibration resistant, solder termination for quick assembly with no dedicated tooling, accommodates up to 18AWG wire.

File format: PDF Size:219 KB

This document describes the features of 3M's 3M Round Conductor Flat Cable .025″ 30 AWG Solid, TPE 3749 Series S. The cable allows for higher signal density, excellent transmission properties, mass termination, and zippable branching or discrete termination. It meets SCSI-3 Fast-20 characteristic impedance requirements. The cable is insulated with Thermoplastic Elastomer (TPE) and is gray in color.

File format: PDF Size:212 KB

TS-0675-09 is the specification sheet for 3M Electronic Test & Burn-In PGA Kit Sockets Pin Grid Arrays 10.

File format: PDF Size:268 KB

3M™ EXL Unitized Debur and Finishing Wheels and Blocks, 4A FIN and 6A FIN are abrasive products produced by 3M Company. The main ingredients are aluminum oxide mineral, cured resin mixture, nylon fiber, polyester scrim, filler and silicone coated release liner.

File format: PDF Size:33 KB

1182 Tape is a double-sided copper foil conductive adhesive tape from 3M company. It consists of a 1-ounce deadsoft copper foil backing that is coated on both sides with a unique electrically conductive pressure- sensitive acrylic adhesive. The product features that it can be used to bond two surfaces together, both electrically and physically, such as conductive gasket to a conductive surface as part of the EMI shielding solution for an electronic enclosure.

File format: PDF Size:167 KB

3M ™ Mini D Ribbon (MDR) connectors are boardmount through-hole right angle receptacle-shielded connectors with electrical characteristics of 1 A, 500 Vrms, and -55°C to 105°C. They have reliable repetitive plug-ins, rugged die cast metal case construction, SMT compatible PCT insulator material, reliable PCB retention, interface latch design, and IEEE 1284C interface.

File format: PDF Size:436 KB

3M™ Adhesive Transfer Tapes with Adhesive 100 941, 965, 966, 9461P, 9461PC, 9462P are designed for temperature exposure to 450°F (232°C) for short periods of time and/or solvent resistance. They have exceptional shear values even at elevated temperatures. They also offer low “outgassing” properties, which is an important consideration for the aerospace, automotive and electronic industries.

File format: PDF Size:101 KB

3M Eurosocket Type C (Rows A & C, A & B or A, B & C Filled) 62CXX Series TS-0813-01 is a high density connector produced by 3M company. It can be mated with DIN 41612 Type C headers and has a highly reliable contact design.

File format: PDF Size:57 KB

This PDF document provides product data for the 3M™ Premium Vinyl Table Mat, a three-layer vinyl mat with excellent electrical properties. The mat meets the requirements of various standards and is a long-time industry favorite. The top layer is a tough and easy-to-clean dissipative vinyl, the center layer is a highly conductive metal scrim for quick charge dissipation, and the bottom layer is a durable non-skid cushion of dissipative foam. The mat is compatible with constant monitors and is available in rolls, mats, and mats with ground cord.

File format: PDF Size:222 KB

3M™ Pak 50 Wiremount Socket .050″ Wiremount Socket for .025″ Pitch Cable P25E Series is a connector produced by 3M Company. It is mainly used for 30 AWG stranded 0.635 mm (25 mil) pitch flat PVC cable (3754 series). It supports Daisy chain connection and is compatible with P50 series IDC boardmount.

File format: PDF Size:251 KB