LUMBERG Manuals

Lumberg SV plug, IP 40, straight version, with threaded joint, solder terminals and long bend protection

File format: PDF Size:59 KB

KLBP 3 is a 3-pole/stereo jack chassis socket acc. to JISC 6560, 6.35 mm, with solder eyes, for back side mounting. The socket has a temperature range of -20 °C/+70 °C.

File format: PDF Size:59 KB

This document describes Lumberg's SWUM™-Einbaukupplung product, which complies with IEC 61076-2-106 and AISG specifications, has an IP 68/67 protection rating, and is suitable for front and rear mounting. The temperature range is -40°C to +85°C.

File format: PDF Size:185 KB

This document describes an Einbaustecker that complies with IEC 60130-9 standard. The product has an IP 68 protection rating and features a screw closure and solder connections. It is designed for rear panel mounting. The temperature range is -40°C to +85°C. The contact materials are copper-zinc with silver and gold plating. The housing is made of zinc die-cast, with copper and nickel plating. The sealing is provided by an NBR gasket. The product offers excellent mechanical and electrical performance.

File format: PDF Size:114 KB

This document describes the features and characteristics of the Klinkensteckverbinder nach JIS C 6560, 3.5 mm connectors produced by Lumberg, including temperature range, materials, mechanical data, and electrical data.

File format: PDF Size:81 KB

The 0308 series connector is designed based on the IEC 60130-9 standard, with an IP 68 waterproof and dustproof rating, and has a screw cap and welding terminals.

File format: PDF Size:507 KB

File format: PDF Size:0 KB

File format: PDF Size:48 KB

This is a circular connector with screw lock and solder terminals for front panel mounting.

File format: PDF Size:112 KB

This is a KLSM 3 connector produced by Lumberg, featuring 2 pin mono, with kink protection and solder terminals

File format: PDF Size:56 KB

This document is the datasheet of SV series round connectors. It introduces the features and characteristics of the product, including temperature range, materials, mechanical data, electrical data, etc.

File format: PDF Size:127 KB

This document introduces a 3.5 mm Jack connector according to JISC 6560 standard, designed for back side mounting on printed circuit boards. The product features a wide temperature range, low contact resistance, and high mating cycles.

File format: PDF Size:69 KB

The 1502 03 is a 2-pin 3.5mm mono jack socket from Lumberg. It has a break contact and can be soldered to a printed circuit board. The socket is rated for 1A and 34V AC/DC. Its contact resistance is 20mΩ and its insulation resistance is 108 Ω

File format: PDF Size:105 KB

This document describes the features and characteristics of the Netzgerätestecker Power supply connectors, including temperature range, materials, mechanical data, and electrical data.

File format: PDF Size:63 KB

This product is a RCA chassis socket, model BTOR 1, brand Lumberg. The product is made of PBT GF material, with CuZn copper-plated and tinned internal contact and CuZn copper-plated and nickel-plated external contact. The working temperature range is -20°C to +70°C, the insertion force is ≤30N, the separation force is 1-15N, and the mating life is 5000 times. The rated current is 2A, the rated voltage is 34V AC/DC, the test voltage is 500V/60s, and the insulation resistance is ≥108Ω.

File format: PDF Size:73 KB

This document introduces an Einbaustecker product launched by Lumberg in 2006, which complies with the IEC 60130-9 standard and has an IP 68 protection rating. It features a screw and solder connection method and is designed for front mounting. The product's characteristics include a wide temperature range (-40 °C to +85 °C), contact materials of CuZn (3-8 pins) and CuZn (12-14 pins), a Zn die-cast housing, a CuZn ring nut, and an NBR sealing ring.

File format: PDF Size:113 KB

KLS 10 2 100 is a 2-pole/mono straight plug with JST brand, the specification is 2.5mm, the contact is CuZn, the housing is PP, the rated current is 0.5A, the rated voltage is 34V AC/DC, the test voltage is 500V/60s, and the insulation resistance is ≥108 Ω

File format: PDF Size:48 KB

This document describes the SWUM™ flange-mounted connector, which is an IP 68/67 rated connector suitable for front mounting. It features a wide temperature range and durability.

File format: PDF Size:72 KB

This is a 3.5mm audio connector, supports 3 poles/stereo, with switch, suitable for PCB board

File format: PDF Size:103 KB

This document provides detailed information about KLS 40 3.5mm 3-pole/stereo straight jack connector, including product specifications, parameters, characteristics, etc.

File format: PDF Size:103 KB