HRS Manuals

1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)

File format: PDF Size:267 KB

The document describes the features and characteristics of the RP34L series receptacles, including low installation height, space saving, snap-lock mechanism, precise connection, sequence mating, no mismating, and ease of mating.

File format: PDF Size:359 KB

This document describes the features and characteristics of GT8 series high-pressure connectors, including anti-oxidation design, shape design to prevent erroneous insertion, escape holes design to prevent secondary soiling, higher surrounding wall design to prevent terminal bending, etc.

File format: PDF Size:88 KB

This document introduces the features and characteristics of the DF22 Series 2004.5 7.92 mm contact pitch, high-current connectors, including maximum current, reliable interior locking function, prevention of incorrect connections, molded-in contact retention tabs, prevention of incorrect board placement, support for encapsulation, prevention of short circuits between adjacent contacts, increased retention force of crimped contacts, and confirmation of complete contact insertion.

File format: PDF Size:574 KB

File format: PDF Size:207 KB

This document introduces Hirose Electric's non-reflective termination products, including N, TNC, SSMA, POB, FL and PO6. The product frequency range is DC to 18.0 GHz, the impedance is 50 ohms, and the maximum input power is 0.25 to 5 W.

File format: PDF Size:165 KB

File format: PDF Size:245 KB

The HIF3FB and HIF3FC series are A106 2.54mm pitch low profile connectors. The HIF3FC series takes complete flux tight measures, while the pin header of the HIF3FB series is a low profile of height 9.2mm. They are suitable for computers, termination equipment, various kinds of electronic equipment, office automation machines, and more.

File format: PDF Size:229 KB

Introduces the characteristics of B153 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series, including novel insulation displacement and crimping ideas, waterproof measures, and broad variations.

File format: PDF Size:545 KB

H/MS Series connector with 20% height reduction, 360° cable exit direction, simple assembly, IP67 protection, etc., Suitable for factory automation equipment, robot equipment, servo motors and various industrial and measuring instruments.

File format: PDF Size:1286 KB

C10 2mm Pitch Miniature Connector A3 • A4 Series is a connector made by Hioki that features a small, lightweight design and high-density mounting. The connector supports DIP, SMT, and crimp types, and can be stacked as needed.

File format: PDF Size:440 KB

C2 2.54mm Pitch High Density Connector A1 and A2 Series is a high density connector from Fuji. It features connectors aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. The A1 series contains 16 types of 6 to 64 contacts, while the A2 series contains 20 types of 1 to 20 contacts. The A1 series is compatible with HIF3B series cable side and HIF3H receptacle for wide applications.

File format: PDF Size:275 KB

The B55 Card Edge Type Ribbon Cable Connector HIF5 Series is a connector with the following features: 1. Product Variation: The area to install the connector body is classified into three types according to full hole mounting area, semi-mounting area and non-mounting area. 2. Mounting Density Enhancement: This connector is designed so that the ribbon cable can turn back within the connector molding range. The connector can be installed without coming out of the insulator. 3. Applicable Cable: The applicable cable is a AWG#28 flat cable (7 pcs./0.127mm, jacket dia.: 0.8~1.0mm). It has characteristics such as voltage resistance, humidity resistance, and vibration resistance.

File format: PDF Size:248 KB

This document describes the features and characteristics of MU SC FC harsh environment attenuators and terminators, including user-friendly push-pull mechanism, guaranteed attenuation over a wide bandwidth, selectable attenuation levels, and maximum input power.

File format: PDF Size:114 KB

This is a PDF document about D2 2.54mm Pitch Miniature Connector for Flexible Board FH1 Series. The connector has a contact pitch of 2.54mm and ensures high contact reliability for high voltage contact. It is available in 18 different contact numbers. The product specifications include rated current, operating temperature range, rated voltage, etc. It is suitable for applications such as HDD, facsimiles, printers, VTR, etc.

File format: PDF Size:67 KB

DF14 Series is a right angle connector that pursues a very low profile on the board. The board mounting height is 2.5mm and it can fetch a signal from an area with no board to board space.

File format: PDF Size:189 KB

The GT3 series is a connector launched by TE. It has low-profile and standard types.

File format: PDF Size:199 KB

The GT10 series is a miniature ECU interface connector that is smaller than existing 040 connectors. It features a front retainer design that prevents incomplete insertion and provides multiple connector options to meet different application needs.

File format: PDF Size:167 KB

This document describes the features and characteristics of the A142 1.27mm Pitch Multi-function Two Piece Connector FX2 Series.

File format: PDF Size:790 KB

PCN11 series socket connector is a high reliability socket connector developed and manufactured by Siemens. The product complies with IEC603-2/DIN41612 standard and has 10, 16, 20, 32, 44, 50, 64, 90, 96, 100 and 128 contact options. Moreover, it adopts a reliable double-sided 2-point contact pin structure and is suitable for a wiring board with a thickness of 2.54mm or more.

File format: PDF Size:743 KB