ON NCV4269 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY Adjustable RESET Sense Output handbook
Update: 28 September, 2023
The NCV4269 is a 5.0V precision micropower voltage regulator with an output current capability of 150mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.5V at 100mA. Low quiescent current is a feature drawing only 240μA with a 1.0mA load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active reset output RO with delay and a SI/SO monitor which can be used to provide an early warning signal to the microprocessor of a potential impending reset signal. The use of the SI/SO monitor allows the microprocessor to finish any signal processing before the reset shuts the microprocessor down. The active Reset circuit operates correctly at an output voltage as low as 1.0V. The Reset function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits. The reset threshold voltage can be decreased by the connection of an external resistor divider to the RADJ lead. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC compliance.
Brand: ON
File format: PDF
Size: 142 KB
MD5 Checksum: 299B04884B6E4F14A71ABC52A1D4BBD3
Publication date: 12 July, 2012
Downloads: -