MAXIM MAX7315 Manual
Update: 28 September, 2023
The MAX7315 is an I2C/SMBus-compatible serial interfaced peripheral that provides microprocessors with 8 I/O ports. Each I/O port can be individually configured as either an open-drain current-sinking output rated at 50mA at 5.5V, or a logic input with transition detection. A ninth port can be used for transition detection interrupt or as a general-purpose output. The outputs are capable of directly driving LEDs, or providing logic outputs with external resistive pullup up to 5.5V. PWM current drive is integrated with 8 bits of control. Four bits are global control and apply to all LED outputs to provide coarse adjustment of current from fully off to fully on in 14 intensity steps. Each output then has individual 4-bit control, which further divides the globally set current into 16 more steps. Alternatively, the current control can be configured as a single 8-bit control that sets all outputs at once. The MAX7315 is pin and software compatible with the PCA9534 and PCA9554(A). Each output has independent blink timing with two blink phases. All LEDs can be individually set to be on or off during either blink phase, or to ignore the blink control. The blink period is controlled by a register. The MAX7315 is controlled through the 2-wire I2C/SMBus serial interface, and can be configured to one of 64 I2C addresses.
Brand: MAXIM
File format: PDF
Size: 461 KB
MD5 Checksum: 12ED9DD3480EDC1ACFA562C886E99726
Publication date: 05 April, 2012
Downloads: -
PDF Link: MAXIM MAX7315 Manual PDF